Resin exhausts 1:72 for a model of the Wellington Mk.II bomber from CMK. It is not a kit but a replacement part that takes the place of simplified plastic exhausts.
Responsibility details are not available.
A resin detail accessory in 1:72 scale meant for a model of the Vickers Wellington bomber in the Mk.II version. It is not an aircraft kit but a set of replacement exhausts, which take the place of simplified parts in plastic. Resin castings hold crisper edges and allow open mouths, which is exactly what shows most on exhausts - plastic parts out of the mold usually have them blanked off. The set is meant for a particular kit of this aircraft in 1:72 scale.
The Vickers Wellington was a British twin-engine bomber with a characteristic geodetic airframe structure. The Mk.II version differed from the most widespread forms in its power unit: in place of radial engines it carried liquid-cooled V12 engines, which changed the shape of the engine nacelles and the layout of the exhausts. It is precisely that difference that makes the exhausts a mark of the type - a part from another version does not fit the Mk.II.
Wash the castings first in warm water with detergent, to rid them of any mold release agent, otherwise neither paint nor glue will hold. Separate the part from the casting block with a saw or a cutter and never snap it off - resin is brittle and breaks unpredictably. Sand the remains of the block smooth and do not inhale the dust from sanding; sand wet, ideally. Try the fit into the nacelle dry and adjust any overhang with a file. Glue with cyanoacrylate, and on larger areas with a slower-setting type, so that there is time to correct the position. Apply a primer before painting, as resin holds paint less well without it. Darken the mouths of the exhausts at the end and add smoke trails running back over the skin.
The package holds only the resin accessory. The kit, paints and glue are not part of it.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
