SALE CONTINUES! Up to 70% off plastic model kits. Limited stock remaining on selected items! here

Acrylic Color BESTIAL BROWN

A warm brown from the Maxx Formula acrylic line, built for tanned leather, wood and animal fur. It dries matte, the bottle holds seventeen milliliters.

Manufacturer Green Stuff World
Product EAN8591111024792

Responsibility details are not available.

3.16 €
2.61 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

A brown that holds leather and wood together

Bestial Brown is the shade a modeler reaches for every time a figure brings up tanned leather. Belts, scabbards, saddles, quivers, pouches or the wrapping of a grip get a firm middle base, on which brightening with beige tones only then begins to work. The same tone serves as the lower coat under the rusty areas of equipment and as the middle value of brown fur.

The binder is acrylic and thins with ordinary water, so the brushes only need rinsing right after the work is finished. The coat dries matte, without a single glossy spot, and because the shade is densely pigmented, it covers a dark base as a rule in two thin coats. The whole line was built above all for a brush, but after thinning it passes through the nozzle of an airbrush as well.

Inside the bottle there are seventeen milliliters of paint and with it a metal ball, which on shaking gets the pigment settled at the bottom moving. The dropper cap allows the contents to be measured out in drops straight onto the palette, so nothing is spilled or dries up needlessly in a cup.

  • A warm brown middle for leather, wood and fur
  • Matte drying without glossy spots
  • It thins with water, the tools are cleaned with water
  • Seventeen milliliters, a dropper, a ball inside

What turns a flat brown into leather is only the procedure: a coat over the whole area, a dark wash pulled into the folds and the edges pulled out with a dry brush with a pinch of a sandy color. The difference between a new strap and a worn saddle is then tuned only by how far the light transition goes.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

For everything that is to look like tanned leather: straps, scabbards, saddles and pouches. It also works well as the middle value of brown fur and as the lower coat under rusty areas.

For work with a brush ordinarily not, the consistency is set directly for a thin coat. For an airbrush, water or acrylic thinner is added until the paint reaches the consistency of milk.

The pigment settles at the bottom over time and shaking alone does not lift it. The ball inside stirs the contents up within a few seconds and the paint returns to its original ratio.

Yes, the line is built for matte drying. If the model needs gloss or a satin fall, only a final varnish is applied; the paint itself does not add it.

Last seen

Green Stuff WorldGSW1926

Acrylic Color BESTIAL BROWN

A warm brown from the Maxx Formula acrylic line, built for tanned leather, wood and animal fur. It dries matte, the bottle holds seventeen milliliters.
In stock
3.16 €
Art ScaleASKT0050

Lead Wire - Round Ø 0,2 mm x 120 mm (30 pcs)

Art Scale Lead Wire, round, 0.2 mm x 120 mm (30 pcs) is a set of the thinnest soft lead wire for fine lines, cables and cords. It is a modeling material, not a paint or a kit.
In stock
3.96 €
PANZER ARTRE35-4011:35

1:35 KTO “Rosomak” Road Wheels

PANZER ART 1:35 KTO Rosomak Road Wheels is a resin set of road wheels for the Polish Rosomak wheeled carrier. It is an accessory, not a complete model.
In stock
18.76 €
IBG modelsWAW0051:72

1:72 Panzerkapfwagen II Ausf. A

The Panzerkampfwagen II Ausf. A in 1:72 scale is an injection-molded plastic kit of the German light tank of the early Second World War. It is supplied unassembled and unpainted.
In stock
8.76 €
ReskitRS72-02171:72

1:72 Bell-Boeing V-22 Osprey Type 1 wheels set

Reskit — wheels for the Bell-Boeing V-22 Osprey (type 1), 1:72 is a resin detail set of replacement wheels for models of the tiltrotor.
In stock
8.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.