A set of three-dimensional SPACE decals for the AH-64E in 1:35 scale from the Czech manufacturer Eduard brings color interior detail with relief onto the model.
Responsibility details are not available.
This is a set of decals from the SPACE line of the Czech manufacturer Eduard for a plastic model of the AH-64E Apache Guardian attack helicopter in 1:35 scale. Unlike ordinary decals, these motifs are not flat: they are printed with relief, so once applied they read three-dimensionally and they are finished in color. It is not a model or a kit but an accessory for the basic kit.
Three-dimensional decals are a way to get richly broken-up, colored detail onto a model without spraying small areas and without assembling fine metal parts. They suit above all where the plastic is smooth or only suggested. On a modern attack helicopter with a glazed cockpit such equipment is clearly visible, which is why the set pays off.
The surface has to be clean, degreased and smooth; carefully cut away any plastic details the decal replaces and sand the area back. Cut each motif out with a sharp scalpel right at the edge and seat it with tweezers, so it does not fold over. With a sponge and a drop of detergent, moisten only the backing paper, lift the element off it and fix it in place with white PVA glue; do not use a decal softener or setting solution, which would attack the printed resin and ruin the element. Once it is dry, the surface can be evened out with a matte varnish.
This is an accessory for a model. The base kit, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
