Art Scale RADIUS razor modeling saw with 100/65 teeth, package of 2 pieces. A tool for very fine cutting of plastic and resin where an ordinary saw cannot reach.
Responsibility details are not available.
A thin razor saw meant for the finest modeling work. The package holds two pieces, and the designation 100/65 refers to two different tooth densities, so you can pick the coarser or the finer side according to the material and the width of the cut. The RADIUS version has a curved edge and suits places where a straight saw will not sit along its whole length, that is curved surfaces, cutouts and tight spots.
A razor saw cuts with very little removal, so do not press on it: the guidance and the number of strokes do more than force. It pays to mark the cut first with a few light strokes and only then to bite in fully. Cut plastic slowly so that it does not heat up from friction, and level the edge with a file or a sanding sponge afterwards. It is worth keeping the second piece in the package aside for clean plastic alone, while you use the first for resin, which dulls the teeth faster.
For modelers who modify parts, convert kits or work with resin and photo-etch and need a cut with minimal loss of material. Thanks to the curved edge it is a complement to an ordinary straight saw, not a replacement for it.
The edge is very sharp. Cut away from your body, use a cutting mat and store the saw out of reach of children.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
