A modeling paint of the ATOM COLOR range in a red shade. Thinning and the method of application follow the manufacturer's instructions on the package.
Responsibility details are not available.
Red is one of the shades a modeler chooses deliberately: for warning surfaces, markings, the insides of covers and hatches, for civil vehicles and for the small things that are meant to catch the eye on an otherwise muted model. It is also the shade that is hardest to work with, because red pigments usually have poorer covering power than dark colors and turn gray easily over a dark base.
Stir the paint thoroughly before use so that the pigment is evenly dispersed. Apply it in several light coats and let each one set before you add the next; one heavy coat will fill the detail and still stay uneven. For the thinner, the thinning ratio, the method of application and the cleaning of tools, follow the manufacturer's instructions on the package, because they differ from range to range.
Under red it pays to lay down a light base, most often white or light gray; you will reach saturation sooner and with fewer coats. Wash and degrease the surfaces before painting, otherwise the paint holds badly on a greasy surface and pulls away when masking. Apply masking tape only to a perfectly dry coat and pull it off slowly and at an angle. Close the container carefully after use and store it at ordinary room temperature so that the paint does not thicken.
Thinner, brushes, an airbrush and the model are not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
