Blinking red LEDs 2 mm in diameter for lighting models, dioramas and scenes. Wiring and power supply according to the manufacturer's instructions.
Responsibility details are not available.
A blinking LED controls its own rhythm, so you need no extra electronics to make a model blink. Red suits the warning lights of vehicles and aircraft, tail lights, beacons on construction machinery, instrument panel warning lamps and bringing science fiction and fantasy builds to life. A diameter of two millimeters is small enough for the LED to hide inside a small part where a standard five-millimeter one would not disappear.
Blinking LEDs 2 mm in diameter in red. The number of pieces in the package, the form of the leads and the recommended power supply are given on the packaging and in the manufacturer's description.
An LED has a polarity, so when wiring it up follow the marking of the leads according to the manufacturer's instructions. Deal with the supply voltage and the need for a series resistor according to the manufacturer as well; connecting it directly to an unsuitable source will destroy the LED. Drill the hole in the model gradually, from a smaller bit to a larger one, so that the plastic does not crack. Run the leads out of sight along the inner wall and secure them with a drop of glue so that they are not broken off by movement. Paint the inside of the space around the LED black, or the light will shine through the wall of the model. Test that it works before you glue the part in for good; once assembled, the LED is out of reach.
The power source, the model and modeling tools are not part of the delivery, unless stated otherwise. What exactly the package holds is given in the manufacturer's description.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
