A Hataka modeling paint from the Orange Line range, a shade named Buffalo Green. Intended for an airbrush as well as a brush.
Responsibility details are not available.
This is a single bottle of modeling paint from Hataka, from the Orange Line range, and the shade carries the designation Buffalo Green. The paint is meant for painting models, not for coating larger surfaces, and it suits an airbrush as well as a brush. Use the thinner and the thinning ratio according to the manufacturer's instructions on the packaging, always the thinner made for this range. A foreign thinner can curdle the paint.
Shake the bottle thoroughly before use, until all the settled pigment has lifted off the bottom. Apply the paint in several thin coats and let the surface set between them. One heavy coat floods the fine details and hides the engraved lines, whereas several light ones give an even opaque shade. Rinse the airbrush and the cup right after spraying, as dried paint is far harder to remove.
When working with a brush, pull in one direction and come back only once it has dried, otherwise the previous coat smears. Green shades tend to be opaque, but it still makes a difference whether they lie over a light or a dark base. So always test the shade on a piece of scrap plastic with the same base the model will have. Wash and degrease the surface of the model before painting, as every paint holds poorly on greasy plastic and the coat rubs off later.
Keep the bottle firmly closed, away from frost and direct sunlight, and ventilate while working. Unless stated otherwise, the paint is supplied on its own, without thinner, brushes and other accessories.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
