Armycast Circles — masking circles is a universal set of die-cut masking circles from 1.0 to 3.5 mm in diameter in steps of 0.1 mm. It is not tied to a particular model or scale.
Responsibility details are not available.
A set of universal masking templates in the shape of circles. It is not intended for a particular model or scale — it is an aid you will use every time you need to create an exactly circular masked area. The range of diameters runs from 1.0 to 3.5 mm and steps up by tenths of a millimeter, so the sheet covers twenty-six different sizes. That makes it possible to hit the size you need exactly, instead of a modeler having to settle for the nearest approximate circle or punch them out with a hole punch.
Lift the circle out of the sheet with the tip of a scalpel or fine tweezers and transfer it into place, where you press it down immediately all round the edge — with small diameters the result is decided precisely by how the edge settles. The base has to be dry, degreased and smooth. Spray several thin coats instead of one heavy one; the paint then has no way of running under. Lift the mask off while the paint is freshly dried, and with the smallest diameters help yourself with the point of a toothpick. If you need a circle larger than 3.5 mm, further ranges of diameters follow on from this set.
For aircraft and vehicle modelers who spray details instead of applying decals, for builders of mottled camouflage and for everyone who wants a stock of precise circular masks on hand, whatever they happen to be working on.
The package holds masking templates only. The model, paints and glue are not part of it.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
