A sheet of pre-cut Artwox Model masking tape 0.7 mm wide serves to set color boundaries accurately on models where a somewhat more robust strip is needed.
Responsibility details are not available.
A universal consumable material for masking during spraying, not a kit. The sheet carries pre-cut strips of masking tape 0.7 mm wide, which are peeled off the backing and transferred to the model. The width is uniform along the whole strip, so the resulting line is even. The use is in no way tied to a particular kit, scale or field.
A slightly wider strip holds its shape better and is easier to handle with tweezers, which you will appreciate above all when you need to lift the mask slightly off the surface and get a soft, blurred transition. It is enough to lay a thin strip of paper under the tape or to lay it down by one edge only. When removing it, work slowly and at a sharp angle. If a tiny ridge of dried paint nevertheless remains at the edge, cut it down with very fine sanding paper only once it is fully cured and polish the area. Store the unused part of the sheet in a closed wrapper, so that dust does not settle on the adhesive layer.
For modelers who spray with an airbrush and want control over both the hardness and the evenness of a color transition without laboriously cutting tape from a roll.
This is consumable masking material. Paints, glue and the model are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
