1:72 Mi-8MT/Mi-17 opened service/emergency hatch - Hobby Boss

1:72 Mi-8MT/Mi-17 opened service/emergency hatch - Hobby Boss

4.76 €

1:72 Mi-8MT/Mi-17 opened service/emergency hatch - Hobby Boss

Mi-8MT / Mi-17 - open service/emergency hatch 1:72 (Quickboost) is a resin replacement part for the Hobby Boss plastic kit. It replaces the hatch molded flat into the fuselage with a version that can be built open. It is not a kit but an accessory for a model you have already bought.

Scale1:72
Manufacturer Aires/Quickboost
Product EAN9991117364348

Responsibility details are not available.

4.76 €
3.93 € without VAT
Out of stock – can be reserved
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Mi-8MT / Mi-17 - Open Service/Emergency Hatch, 1:72, Quickboost

A resin replacement part of the Quickboost brand, which is made by the Czech studio Aires. This is not a kit - you will not build a helicopter out of it. It is a detail accessory intended for the plastic Mi-8MT / Mi-17 kit from Hobby Boss in 1:72 scale.

Why people buy it

The plastic kit has the service and emergency hatch molded flat as part of the fuselage, that is permanently closed. This set replaces it with a part that can be built open. The model gains three things at once: the inside is revealed (equipment, wiring, a tank) and the machine suddenly looks alive, as though work were going on around it; a natural subject arises for a diorama with a ground crew - a mechanic, tools, steps, an open machine; and the open panel breaks up the smooth surface of the fuselage, which gives the model depth and shadow where there used to be nothing but flat plastic.

Note, important before you buy: the exact contents of the package are not stated here. The set is conceived as a replacement for the hatch itself, so do not automatically assume that it also contains the interior behind it. If neither the kit nor this set supplies the inner space, reckon on finishing the space behind the open hatch yourself (your own details, wires, sheet), because otherwise emptiness would gape behind the open panel. Please check the contents on the package itself.

The real subject

The Mil Mi-8 and its modernized successor the Mi-17 are transport helicopters of Soviet, or rather Russian origin and are among the most widespread helicopters in the world. They have flown and still fly on practically every continent, in military and civil roles alike: carrying troops and materiel, evacuating the wounded, firefighting, rescue work. The Czech connection is a strong one too, because Czechoslovakia operated machines of this family and the Czech army uses them to this day, including on missions abroad.

Working with resin

  • Resin is not bonded with cement for polystyrene, so use super glue or a two-part epoxy.
  • Cut the part off the casting block with a saw or a knife, do not tear it off.
  • Resin dust is harmful to health, so sand wet and do not inhale it.
  • Before painting, wash the part in water with dish soap so that residues of mold release agent disappear, because otherwise the paint will not hold.

Who the set is for

  • modelers building the Mi-8MT / Mi-17 in 1:72 from the Hobby Boss kit
  • creators of dioramas with ground crews and service equipment
  • those who want to bring a model to life with an open panel instead of a smooth fuselage

The accessory is supplied unpainted. The base kit, glue and paints are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is a resin replacement part - an accessory for the plastic Mi-8MT / Mi-17 kit from Hobby Boss in 1:72 scale. The kit itself, the glue and the paints are not in the package.

That is not stated here - check the contents on the package itself. The set is conceived as a replacement for the hatch, so reckon with the possibility that you will have to finish the space behind the open panel yourself. Without that, emptiness would gape there once it is open.

Ordinary liquid polystyrene cement will not join resin. Use super glue (cyanoacrylate) or a two-part epoxy. Roughen and degrease the surface beforehand.

Yes. Cut it off the casting block, sand it wet (dry resin dust must not be inhaled) and wash it in water with dish soap so that residues of mold release agent disappear. Only then the primer and the paint.

Last seen

Aires/QuickboostQB492331:48

1:48 Westland Wessex HAS.3 top engine cooling grille for Italeri

Quickboost Top Engine Cooling Grille for the Wessex HAS.3, 1:48 is a resin accessory that replaces the cooling grille with a finely cast, open-structure part.
In stock
7.96 €
1:72 E-2C-25 %Stock ClearanceFavorite
EduardCX2361:72

1:72 E-2C

Eduard 1:72 E-2C Hawkeye masks are precisely shaped painting masks for clean spraying of the glazing and the wheels, not a model.
Last one!of 4
9 €6.76 € You save 2.24 €
Dan modelsDAN480081:48

1:48 AN-2 FEDERATION OF AEROBATICS OF UKRAINE

A 1:48 decal sheet for the An-2 biplane with markings that the name links to the Ukrainian aerobatics federation.
In stock
15.56 €
TrumpeterTR034731:700

1:700 F-8 Crusader

Trumpeter F-8 Crusader 1:700 is a set of injection-molded plastic models of the carrier-based fighter for populating the decks of aircraft carriers.
In stock
5.96 €
MadworksMWTS-010

0.1 mm Tungsten Steel Line Engraver - 1 piece (tang diameter 3mm)

Madworks Tungsten Steel Line Engraver (0.1 mm) is a tungsten steel scriber for the finest engraving of panel lines on models.
In stock
11.16 €
First to fightFTF1151:72

1:72 Hotchkiss H38 with SA18 cannon

1:72 Hotchkiss H38 with SA18 cannon is a plastic kit of the French light tank with the short 37 mm gun.
In stock
9.16 €
ReskitRSK72-261:72

1:72 MHU-141M munitions trailer with weapon platform (type 1)

Reskit 1:72 MHU-141M munitions trailer with weapon platform (type 1) is a resin 3D printed set of ground equipment for aviation dioramas.
In stock
30.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.