1:87 (H0) stone well is a 3D-printed resin scenic accessory for a railway layout and a diorama in H0 (1:87) scale from the brand FLY.
Responsibility details are not available.
This is a 3D-printed resin scenic accessory from the brand FLY in H0 (1:87) scale showing a stone well. It is not a vehicle model and not a figure but a small building element that completes a rural or historical scene. The exact number of parts varies with this type, so it is not stated here without verification.
A well is a rewarding focal point of a village green, a yard or a garden; a scene with figures naturally comes about around it. In H0 scale it fits ordinary cottages, fences and vehicles and gives a layout or a diorama its scale and its story.
Cut off the print supports and wash the mold release agent off the parts. Glue with cyanoacrylate glue (super glue). You will bring the stone to life with a gray or sand base paint, with a dry brush on the edges and a dark wash into the joints between the stones; moss and weathering are refined with pigments. We recommend a primer before painting.
Similar scenic accessories are made in larger scales as well (1:72, for example). It is supplied as an unassembled and unpainted 3D-printed part; glue, paints and a base are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
