A 610 gallon drop tank for the F-15 in 1:32 scale is a 3D-printed resin detail part (1 piece) from Reskit. It is not a model of an aircraft but an accessory for F-15 kits.
Responsibility details are not available.
This product is not a model of an aircraft but a 3D-printed resin detail part for experienced modelers in 1:32 scale from Reskit. The package contains one drop tank with a capacity of 610 gallons of the kind used on F-15 Eagle fighters. The part is produced by modern direct 3D printing technology with a fine surface.
A drop tank increases the range of a machine and is hung under the fuselage or the wing. With this part you complete or replace the tank from a base F-15 kit and gain a truer shape and more detail. It is intended for use with a plastic F-15 kit in the corresponding scale; check compatibility with your own kit before buying.
First wash the resin 3D-printed part free of uncured print resin and carefully cut off the print supports. Glue it with cyanoacrylate glue (super glue), fill the seams and sand them with respiratory protection. Spray a primer before painting.
This is a standalone resin part (3D printing), not a model of an aircraft. The kit, glue and paints are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
