1:48 MiG-25PD 3D-Printed & coloured Interior on decal paper (ICM) (with 3D-printed resin parts)

1:48 MiG-25PD 3D-Printed & coloured Interior on decal paper (ICM) (with 3D-printed resin parts)

23.56 €
Add to Cart

1:48 MiG-25PD 3D-Printed & coloured Interior on decal paper (ICM) (with 3D-printed resin parts)

A three-dimensional colored cockpit interior for the MiG-25PD on a decal backing paper in 1:48 scale for ICM kits, supplemented with three-dimensionally printed resin parts.

Scale1:48
Manufacturer Quinta Studio
Product EAN7761114482752

Responsibility details are not available.

23.56 €
19.47 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The MiG-25 is a Soviet twin-engine interceptor built for high speeds and altitudes. You can tell it by the massive angular fuselage, the high-set wing and the pair of vertical tails. The PD version is its modernized interceptor form. The cockpit is single-seat and, once the canopy is opened, it is very well visible in 1:48 scale.

What the set contains

The set combines two different technologies. The basis is a colored three-dimensional interior shaped for the MiG-25PD kit from ICM, that is the elements of the instrument panel, the side consoles and other parts of the cockpit with raised relief and finished colors. According to the name it also includes separate parts made by three-dimensional printing from resin, which add to the inside of the cockpit the parts that a flat element cannot capture.

Building and painting tips

The colored interior elements are printed on a decal backing paper. Cut the part out, soak it for about fifteen seconds in lukewarm water and slide it off the paper into place. It has no adhesive of its own, so paint the cockpit in advance and polish it with a gloss varnish of the Future, Klear or Tamiya X-22 type; on broken-up surfaces a drop of super glue helps. Do not use a decal softener or a setting solution, the chemicals attack the printed resin. With the printed resin parts the procedure is different: cut the print supports off with a sharp blade a little away from the part, sand the rest down, wash and degrease the parts and bond them with super glue, because they are not polystyrene.

Who it is for

The set suits a modeler who wants the cockpit of a large interceptor finished faithfully and quickly and is not afraid of working with tiny printed parts.

The box contains this set only. The aircraft kit, paints and glue are not included in the delivery, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Yes, briefly. Soak the cut-out part for about fifteen seconds in lukewarm water and slide it off the backing paper into place. Do not use a decal softener.

Cut the print supports off with a sharp blade a little away from the part and sand the rest down. Then wash and degrease the parts and bond them with super glue.

The MiG-25PD kit in 1:48 scale from ICM. On models from other manufacturers it can be used only with adjustments.

A sheet with the three-dimensional colored interior and printed resin parts. The aircraft kit, paints and glue are not included.

Last seen

Quinta StudioQD+485601:48

1:48 MiG-25PD 3D-Printed & coloured Interior on decal paper (ICM) (with 3D-printed resin parts)

A three-dimensional colored cockpit interior for the MiG-25PD on a decal backing paper in 1:48 scale for ICM kits, supplemented with three-dimensionally printed resin parts.
In stock
23.56 €
AK interactiveAK11772

SIGNATURE SET – HISTORICAL COLOR SET – NAPOLEONIC COLORS BY GABRIELE ESPOSITO

Signature Set - Historical Color Set: Napoleonic Colors by Gabriele Esposito is an AK interactive acrylic paint set put together for figures and equipment of the Napoleonic period.
In stock
49.56 €
Furball Aero-DesignFBDS72041:72

1:72 Colors and Markings of US Navy F6F Hellcats Part 1

Furball Aero-Design 1:72 US Navy F6F Hellcats: colors and markings, part 1 is a set of water-slide decals with the schemes of F6F-5 carrier fighters.
In stock
19.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.