The K-36DM ejection seat in 1:72 scale is a 3D-printed resin accessory from Temp Models.
Responsibility details are not available.
A resin K-36DM ejection seat in 1:72 scale from the Russian brand Temp Models. The manufacturer states it as a seat for installation in the Russian Su-27, MiG-29 and MiG-31 aircraft of various versions. In a small scale the seat is the only piece of the cockpit that is really visible under the canopy, and the plastic version tends to be coarse and without belts. It is not an aircraft kit but a replacement part.
K-36 is a family of Soviet and Russian ejection seats that belongs among the most successful designs of its kind. The seat can save a pilot even in a situation where the aircraft is flying very low or standing on the ground, and it became famous at air shows where an escape took place before the eyes of the spectators. Its characteristic marks are the array of telescopic stabilizing booms and the pronounced headrest.
Release the seat from the supports with a new blade and level the surface underneath it. Wash the resin in lukewarm soapy water before painting. Spray the base shade first, then lift the edges with a dry brush and darken the recesses with a tone. Paint the belts in a different tone and suggest the buckles with a fine tip; they are what makes the greatest impression in a small scale.
The set is supplied unassembled and unpainted. The model, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
