Su-30SM sensors and antennas in 1:72 hold, according to the manufacturer, the full range of sensors, antennas and air pressure sensors of production aircraft. An accessory for a model.
Responsibility details are not available.
A detail set in 1:72 scale from the Russian manufacturer Temp Models. For it the manufacturer gives the full range of sensors, antennas and air pressure sensors fitted to production Su-30SM aircraft of various modifications; as the material it gives resin. The set replaces the coarse plastic bumps from the kit and does not make up an aircraft model.
The Su-30SM is a two-seat multirole version derived from the heavy Su-27 fighter, fitted with foreplanes and engines with thrust vectoring. Its rich avionics bring with them a large number of antennas and sensors all over the airframe, and their arrangement changes between batches and operators. It is exactly by those that a model can be placed precisely with a particular aircraft, and that is why it makes sense to replace the coarse plastic bumps with finer parts.
For this set the manufacturer gives resin as the material. First wash the parts in lukewarm soapy water and let them dry thoroughly, or the primer will not hold. Separate them from the carrier with a sharp scalpel or a saw and sand the cut. They are glued with cyanoacrylate glue, that is with super glue. Lay down a filler primer before painting and do the sanding wet and with respiratory protection.
The set is supplied unassembled and unpainted. Glue, paints and the base model are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
