A sheet with horizontal siding at a 2.1 mm spacing, one millimeter thick, area 15 x 30 cm.
Responsibility details are not available.
The step of the cladding here is 2.1 mm, which comes from eighty-three thousandths of an inch. Each strip has an offset edge at the bottom, so a distinct horizontal line stands out in the shadow and the wall does not look like a smooth surface with grooves. The material is a millimeter thick and the area of the sheet is 15 x 30 cm.
The conversion gives a board 7.3 cm wide in 1:35 scale, a flat 10 cm in 1:48 scale and roughly 5 cm in 1:24 scale. That matches an ordinary American building, a porch with a wooden railing or the side wall of a hay barn. Cladding of exactly this kind stands on most period photographs from the countryside, and it can be made out from a meter away from the display case.
You get wood texture into the plastic with a wire brush drawn along the boards, not across them. Then apply a dark glaze, let it run into the joints and go over the surface with a dry brush in a light shade. A missing board is the quickest route to a story: cut one strip out completely, glue a piece of dark plastic behind the opening and tear the edges of the opening into splinters with a scalpel. Suggest nail heads with the point of a needle at regular spacing along the posts. The final touch is green growth at the foot of the wall, where damp lingers longest.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
