Aber photo-etched welds (Weld lines) are a general-purpose photo-etched accessory, not a kit. They imitate weld beads on armor and on the joints of a hull.
Responsibility details are not available.
This is a photo-etched brass accessory from the Polish brand Aber, not a model. The set consists of thin strips with the relief of a weld bead, with which realistic welds between the armor plates of the hull, the turret and the superstructures are finished off on a model.
The welded armor of real vehicles has pronounced, irregular beads, which are lost on smooth plastic parts. Photo-etched welds glued on create a sharp transition, fine in scale, which plain paint or putty will not achieve. The strips are cut to the length needed and laid along the joints. The accessory is general-purpose for models of armored vehicles, typically in 1:35 scale.
Cut the strip off with a sharp knife or with shears for photo-etched parts, lay it along the seam and fix it at points with cyanoacrylate glue, then finish gluing it along its whole length. For a smoother junction the transitions can be blended in lightly. Once it has cured, spray a primer over it so that the paint holds on the metal.
An accessory, not a kit. The base model, glue and paints are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
