LAST CHANCE! 20% OFF Ends Tonight!

1:144 BOEING B-29 LANDING FLAPS

1:144 Boeing B-29 landing flaps is a resin accessory with the extended high-lift devices of the trailing edge of the wing. It is not a kit of the aircraft but a replacement part for a plastic model.

Scale1:144
Manufacturer LACI
Product EAN8591111000000

Responsibility details are not available.

17.56 €
14.51 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Boeing B-29 landing flaps, 1:144 scale

A resin detail set that replaces the fixed molded trailing edge of the wing of a plastic kit with extended landing flaps. This is neither a model of the aircraft nor a part of one that can be built on its own; it is an accessory intended for installation into a finished B-29 kit in 1:144 scale.

The real subject

The B-29 was a four-engine all-metal aircraft with a pressurized cabin and, for its time, an exceptionally high wing loading. That is precisely why it was given large-area Fowler type flaps: as they extend, they first move aft along tracks and only then tilt down, so they increase not only the camber of the airfoil but the area of the wing itself. On this type the difference between the cruise and the landing configuration is visually very pronounced and it is one of the details that most brings a model standing on the ground to life.

Installation and painting tips

First wash the parts in warm water with detergent so that the residue of the mold release agent disappears, otherwise the paint will not hold. Cut the casting blocks off with a fine saw and sand the surface down; when sanding resin, protect your airways and work wet. The trailing edge of the wing of the kit has to be cut out. Proceed in small steps and keep dry-fitting until the flap seats without pressure. It is glued with cyanoacrylate glue, as ordinary plastic cement has no effect on resin. Before painting, go over the joint with primer, which will reveal both engraved steps and insufficiently sanded places. The insides of the flap wells and the lower surfaces of the flaps are usually painted differently from the skin, so paint them before you glue the set in for good.

Who the set is for

  • Modelers who build the B-29 in the landing or taxiing configuration
  • Builders who already have experience of cutting into plastic and of resin
  • Collectors of 1:144 scale who want to set the model apart from a straight-from-the-box build
  • Dioramas with the aircraft on the ground, where the extended devices are visible

The set is supplied as a resin accessory, unpainted. The base kit, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is a resin detail accessory that replaces the trailing edge of the wing with extended flaps. You have to have the base plastic kit separately.

Yes, a set of this type assumes that the molded trailing edge is cut off. Cut in small steps and keep dry-fitting.

Cyanoacrylate glue. Plastic cement does not bite into resin and the joint will not hold.

The set is intended for 1:144 scale. Before buying, compare the shape of the part with the wing of the kit you are building.

Last seen

LACILAC1440441:144

1:144 BOEING B-29 LANDING FLAPS

1:144 Boeing B-29 landing flaps is a resin accessory with the extended high-lift devices of the trailing edge of the wing. It is not a kit of the aircraft but a replacement part for a plastic model.
In stock
17.56 €
Brush - Pro Modeler - Natural Hair Round No. 3
-20 %
Favorite
VallejoVALB01003

Brush - Pro Modeler - Natural Hair Round No. 3

A round natural hair brush in size three. It holds enough paint for a continuous application and keeps its point for detail at the same time.
In stock
11.56 €9.25 € You save 2.31 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.