Douglas A-26B Invader in 1:32 scale is a set of self-adhesive Eduard masking templates for the glazing and the wheels. It is an accessory for painting, not a kit.
Responsibility details are not available.
The package contains no plastic: it is a sheet of precisely die-cut self-adhesive masks for masking the glazing and the wheels. In the large 1:32 scale such a set carries slightly different weight than on small models: the masks are larger and easier to handle, but at the same time every imperfect edge is substantially visible on the finished model. That is exactly why on large models it pays to mask with a template and not with hand-cut tape.
Degrease the glazing with alcohol and let it dry. Lay the mask on without stretching it and press the edge down along its whole length with a blunt tool. On large areas that a mask does not cover entirely it is more practical to cover the rest with paper and tape than to buy further masks. Spray the paint in thin coats. Anyone who wants to be sure can spray a thin coat of clear over the edge once the masks are in place: the clear runs under the edge first, seals it, and the coat of color then has no way under. Take the masks off shortly after the paint has dried, at a sharp angle back over themselves.
The package contains masking templates only. The model, paints and glue are not part of it.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
