Wheels with tires flattened under load for the early-form F-4 Phantom II in 1:32 scale is a resin accessory set from the Armory brand.
Responsibility details are not available.
This is an accessory, not a kit of the aircraft. The set contains wheels cast in resin with tires shaped with the settling where they touch the ground, and according to the name it is tied to the early form. The manufacturer is Armory. The number of parts and the rest of the contents of the package are not stated here.
The Phantom was built for a long time, in great numbers and in many versions, and its wheels did not stay the same over time. The manufacturer therefore offers several sets divided by production period, and this one covers the early machines. Before you order the set, check against photographs and references for the particular machine which period it falls into. In the large 1:32 scale the landing gear is one of the first places the viewer looks, so a wheel from the wrong stage can be told.
Wash the castings in lukewarm water with a drop of dish soap to remove the mold release agent and let them dry. Cut the casting block off with a saw and level the surface on sanding paper on a flat board. Sand wet and with respiratory protection. Before gluing, fit the wheel dry, turn it with the settled part facing down and try how the model stands. It is glued with cyanoacrylate glue. When painting, first spray the whole wheel in the tire shade and the hub can then be handled with a brush or through a circular mask.
The accessory is supplied unpainted and unassembled. Glue, paints and the base kit are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
