1:35 105mm Barrel for Polish concept tank PL-01

1:35 105mm Barrel for Polish concept tank PL-01

11.56 €
Add to Cart

1:35 105mm Barrel for Polish concept tank PL-01

1:35 105 mm barrel for the Polish PL-01 concept is a turned metal part in 1:35 scale that replaces the plastic barrel from the kit. It is a replacement part for a kit you already own, not a model.

Scale1:35
Manufacturer Aber
Product EAN8591111000000

Responsibility details are not available.

11.56 €
9.55 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

A turned 105 mm barrel for the PL-01 in 1:35 scale

This item from the Polish maker Aber is a turned metal barrel in 1:35 scale, intended for a model of the Polish PL-01 light armored vehicle concept. It is not a model and nothing can be built from it on its own. It replaces the plastic barrel from the main kit, the one part that is always troublesome on models of armored vehicles. Turned metal brings a perfectly straight axis, a circular cross-section with no parting line and a precisely drilled muzzle, which on a plastic part can only be imitated by laborious drilling and sanding.

The real subject

The PL-01 is a Polish concept vehicle in the class of light armored vehicles for direct fire support, presented as a technology demonstrator. It is distinguished by a low silhouette with pronounced faceted outer panels meant to reduce its radar and thermal signature. The main armament of the concept is given as 105 mm, which is what this barrel corresponds to. It is a development project, not equipment taken into series production.

Building and painting tips

Cut the plastic barrel off with a saw or a cutting disc at a right angle to the axis and level the face on abrasive paper laid on glass, or the metal barrel will sit crooked. Degrease the metal with alcohol before gluing; grease from your fingers is the main reason a barrel later falls out. It is glued with superglue, and on a larger contact area a slower, thicker type is advisable, as it gives you time to line things up. Check the axis of the barrel by eye from the front and from above before the glue sets. A primer for metal in two thin coats is needed before painting. Darken the muzzle slightly after painting; on metal it reads differently than on plastic.

Who the barrel is for

  • Builders of modern armored vehicles in 1:35 scale
  • Modelers who want to be rid of the parting line on a plastic barrel
  • Those who build for a competition or a display case seen close up
  • Modelers with experience of cutting plastic and gluing metal

This is an add-on part for a kit you already own. The model, paints, glue and tools are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. This is a separate turned barrel that you fit to a kit you already own.

Turned metal has a circular cross-section with no parting line, a straight axis and a drilled muzzle. On a plastic part that can only be matched by laborious sanding and drilling.

With superglue. Cement for plastic has no effect on metal, and the metal has to be degreased before gluing.

Yes. Paint does not hold on bare metal, so use a primer made for metal in two thin coats.

Last seen

AberABR35L2991:35

1:35 105mm Barrel for Polish concept tank PL-01

1:35 105 mm barrel for the Polish PL-01 concept is a turned metal part in 1:35 scale that replaces the plastic barrel from the kit. It is a replacement part for a kit you already own, not a model.
In stock
11.56 €
Aires/QuickboostQB321971:32

1:32 Eurofighter Typhoon twinseater antennas

Quickboost 1:32 Eurofighter Typhoon (two-seater) - antennas is a resin accessory: a set of antennas for a model of the two-seat version of the Eurofighter Typhoon fighter in 1:32 scale.
In stock
4.76 €
1:32 F-104A 3D-Printed & coloured Interior on decal paper (Italeri) (Small version)-25 %Stock ClearanceFavorite
Quinta StudioQDS322461:32

1:32 F-104A 3D-Printed & coloured Interior on decal paper (Italeri) (Small version)

An F-104A Starfighter interior in 1:32 in a reduced scope from Quinta Studio contains printed colored cockpit equipment on decal film in a leaner selection than the full set. Intended for the Italeri kit.
2 leftof 4
18.76 €14.08 € You save 4.68 €
VallejoVALSC1041:35

1:35 Country crossroad / railway section 31x21cm

The Vallejo diorama base country crossroad with a railway 31x21 cm is a cast scenic base for models and figures.
In stock
51.96 €
IBG modelsIBG350701:35

1:35 7TP Polish Tank Single Turret - Early Production

The 1:35 7TP Polish Tank Single Turret - Early Production kit from IBG Models: the Polish light tank of 1939 in the single-turret version of early production.
In stock
33.96 €
1:450 J.M.S.D.F. DDG Atago -25 %Stock ClearanceFavorite
HasegawaHA401041:450

1:450 J.M.S.D.F. DDG Atago "2017"

A plastic kit of the guided missile destroyer J.M.S.D.F. DDG Atago as she was in 2017, 1:450 scale from the Japanese firm Hasegawa. A model of a modern surface ship of the Japan Maritime Self-Defense Force.
2 left
51.96 €38.96 € You save 13 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.