1:35 M1A2 SEP V2 Abrams - Voiio

The Quickwheel 1:35 masking set for the road wheels of the M1A2 SEP V2 Abrams tank is cut for the Voiio kit. It masks out the wheel rims so the tire band can be sprayed in one go.

Scale1:35
Manufacturer Quickwheel
Product EAN8591111000000

Responsibility details are not available.

8.76 €
7.24 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

M1A2 SEP V2 Abrams wheel masking set in 1:35 scale

An accessory for painting from Quickwheel, not a kit. You stick the masks onto the wheels from the box and spray the tire bands with an airbrush with no masking out by hand. According to its name the set is cut for the Voiio kit; wheel masks are always tied to a particular molding, because the diameter of the wheel and the width of the tire band differ between manufacturers.

What makes the running gear of this subject special

The Abrams rides on torsion bars and carries seven large road wheels with a pronounced rubber tire band on each side, the drive sprocket at the rear and the idler wheel at the front. The essential point is that the whole running gear is covered by heavy side plates and only the lower part of the wheels stays visible. That tempts you into skimping on them — except that this narrow strip is at the viewer's eye level on a finished model. The wheels also have to be finished before you fit the plates, or you can no longer reach the tire bands with an airbrush. A large wheel diameter also means a long circumference, along which a hand-drawn line holds worse than on the small wheels of German vehicles.

How to work with it

Level the wheels, degrease them and spray the base shade. Apply the mask to a perfectly dry finish and press the whole circumference down carefully. Spray square and in thin coats. Choose a tire band shade toward a dark gray; on a sandy ground the running surface will dust over quickly anyway, so the pigments have the last word. Take the masks off while the paint has flashed off, and only then fit the side plates.

Who the set is for

  • For a beginner building a first modern tank who wants the running gear finished with no touch-ups
  • For an experienced modeler counting the time spent on seven wheels per side
  • For builders of modern American equipment with a running gear behind side plates
  • For anyone who paints with an airbrush and wants a sharp tire band transition

This is a masking accessory. The kit, paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Yes. The lower part of the wheels stays visible and sits in the viewing plane on the model. An unfinished running gear leaps out there.

No, the set holds only masks for painting the wheels from your kit.

The name ties it to the Voiio kit. The wheel diameter differs between moldings, so with another brand check the match beforehand.

The base coat on the wheels first, then the masks and the tire bands, after the masks come off the wash and the pigments, and only at the end the fitting of the side plates.

Last seen

QuickwheelQW-2501:35

1:35 M1A2 SEP V2 Abrams - Voiio

The Quickwheel 1:35 masking set for the road wheels of the M1A2 SEP V2 Abrams tank is cut for the Voiio kit. It masks out the wheel rims so the tire band can be sprayed in one go.
In stock
8.76 €
Albion AlloysALA2005

Brusné polštářky 8000 (2 ks)

Foam abrasive pads in grade 8000, two pieces in the package. The second-to-last grade of the range, suitable for canopies, clear parts and gloss surfaces.
In stock
3.96 €
EduardED6722841:72

1:72 S-199 exhaust stacks PRINT

Avia S-199 exhaust stacks PRINT 1:72 is a 3D-printed resin set of exhaust stacks by Eduard for models of this postwar Czechoslovak fighter.
In stock
6 €
Ukrainian Scale Cars Production (USCP)U24T0521:24

1:24 Mini MPI Late Type Wheel Arches (TransKIT)

Resin fender flares of the late type for a model of the fuel-injected Mini. A small part that markedly changes the stance of the car. 1:24 scale.
In stock
12.76 €
ReviREVI023

Časopis Revi č.23

Revi magazine issue 23 is a Czech magazine about aviation history and plastic modeling. A printed publication, not a kit.
In stock
2.52 €
Mettalic DetailsMDM48171:48

1:48 Su-33. Masks (Minibase)

Metallic Details 1:48 Su-33 Masks is a set of self-adhesive painting masks for spraying the glazing and the frames on a model of the Sukhoi Su-33 carrier fighter in 1:48 scale. It is not a kit, but an accessory for the build, and the set is cut for the Su-33 kit from the manufacturer Minibase.
In stock
3.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.