1:35 Pantsir-S1 Painting mask (TIGER M.)

SX-Art 1:35 Pantsir-S1 – painting mask is a pre-cut self-adhesive mask for the Pantsir-S1 air defense system in 1:35 scale, cut for the kit from Tiger Model. An accessory for a kit, not a model.

Scale1:35
Manufacturer SX-Art
Product EAN8591111000000

Responsibility details are not available.

5.16 €
4.26 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Pantsir-S1 1:35 — a painting mask from SX-Art

A pre-cut self-adhesive masking set in 1:35 scale for the Pantsir-S1 missile and gun air defense system. It is not a kit but an accessory for a model you already own. The set is cut for the kit from Tiger Model — a mask of the same name for the Zvezda kit exists as a separate item, so the target kit is the only distinguishing detail here and has to be watched when ordering.

What is masked on the Pantsir

The Pantsir-S1 sits on a heavy wheeled chassis, so the masking work falls into two very different parts. The first is the cab of the chassis: flat panes of glazing in thick frames and side vision ports, where tape is hard to hold in a single run. The second is the wheels — large off-road tires on which the rubber has to be separated from the painted rim all the way round and to the same width on every piece. On top of that comes the combat module with its antennas and optical faces, which are meant to stay clean once the paint is on. It is exactly this combination of flat panes and many circles that makes the Pantsir a model where a pre-cut mask pays off most.

Fit and checking before painting

Before you peel the backing paper off, offer the mask up dry and compare the cut with the frames of the glazing and with the diameters of the wheels. With two almost identically named sets for two different kits this check is essential — if the cut does not fit, you probably have the set for the other kit. Degrease the surfaces, center the circular masks on the hubs of the wheels and tap the edge down with a blunt toothpick all the way round. Spray in thin coats and take the masks off while the paint has only just dried.

Who the mask is for

  • Builders of modern wheeled vehicles and missile systems in 1:35 scale
  • Modelers who want uniform rubber tires on every wheel
  • Anyone who needs sharp edges around the cab glazing and the optics
  • Builders of the corresponding kit from Tiger Model

This is an accessory for a kit. The model, paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is a masking set — an accessory for a kit you have already bought. The model, paints and glue are not in the package.

Because they are two different sets for two different kits — this one is cut for the Tiger Model kit, the other for the Zvezda kit. They cannot be swapped, as the shapes of the parts differ.

Offer the mask up dry on the parts before you peel the backing off. If the cut does not match the frames of the glazing and the diameters of the wheels, it is most likely the set for the other kit.

The chassis of the system has several axles, and it is hard to get the rubber tires the same width by hand. That uniformity of the result is the main reason to reach for a pre-cut mask.

Last seen

SX-ArtSXA350581:35

1:35 Pantsir-S1 Painting mask (TIGER M.)

SX-Art 1:35 Pantsir-S1 – painting mask is a pre-cut self-adhesive mask for the Pantsir-S1 air defense system in 1:35 scale, cut for the kit from Tiger Model. An accessory for a kit, not a model.
In stock
5.16 €
EduardEDD720521:72

1:72 North-American P-51D-5 Mustang 357th FG

North American P-51D-5 Mustang, 357th FG 1:72 is a decal set from the Czech manufacturer Eduard devoted to the aircraft of one of the American fighter groups of the Second World War.
In stock
10.40 €
3DF3DF1048131:48

1:48 Hs 129 Exhausts (for Hasegawa/Hobby 2000) 3D print

The printed Hs 129 exhausts in 1:48 scale from 3DF replace the plastic parts from the Hasegawa and Hobby 2000 kits and give the engine nacelles of the ground-attack aircraft faithful detail.
In stock
6.76 €
Aires/AerobonusAER4800841:48

1:48 U.S.A.F. Training group - Vietnam War 1965 - 1973

Aerobonus 1:48 U.S.A.F. Training group - Vietnam War 1965-1973 is a resin set of figures of a US Air Force training group from the Vietnam War period.
In stock
6 €
Black Dog modelBDT350161:35

1:35 British SAS Jeep -Chevrolet Africa

The British SAS jeep and Chevrolet Africa accessory set 1:35 is a resin set of stowage and equipment from Black Dog for models of the British jeep and the Chevrolet truck of the SAS and LRDG units in North Africa.
In stock
36.76 €
Artwox ModelBD200011:700

1:700 DKM Bismarck detail up set(For trumpeter 05711)

A combined Artwox Model accessory package for a model of the German battleship Bismarck in 1:700 scale. It is not a ship kit but a set of accessories for a model you already have. Made for the Trumpeter 05711 kit.
In stock
37.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.