A photo-etched wicket type B in 1:35 from the manufacturer Aber. A diorama accessory: a pedestrian entrance wicket for the fencing of a scene.
Responsibility details are not available.
This is a photo-etched metal diorama accessory in 1:35 scale from the Polish manufacturer Aber. The set holds parts for assembling an entrance wicket in the type B variant, that is, the smaller way through for people on foot, which complements the entrance gate and the fencing.
A wicket is the detail that gives the whole its logic: a scene with a fence, a gate and a wicket reads as a real place rather than a backdrop. Photo-etched metal holds the thin sections of the frame, the infill and the fittings at a scale that in plastic would be unrealistically massive.
Separate the parts with a sharp scalpel on a hard surface, and never break them out by twisting. A photo-etch bending tool or two steel rulers will serve for the bends. Glue with cyanoacrylate glue (super glue); a two-part epoxy holds better on larger joints. Degrease the metal before painting and lay down a base coat meant for metals, and only then acrylics or enamels. You create weathering with a wash in the joints, a drybrush and pigments.
This is a diorama accessory, not a complete model. Glue, paints and a base board are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
