Replacement wheels for a model of the C-130 Hercules transport aircraft in 1:48 scale, in the configuration designated as the mid type.
Responsibility details are not available.
The C-130 Hercules is an American four-engine transport aircraft with a high-set wing and a cargo ramp in the rear. It serves in dozens of countries and is known for coping even with a short and unpaved surface. The landing gear matches that: it takes hard touchdowns and a rough surface, and on a finished model it is one of the places an observer notices first.
The set brings replacement wheels for a model of the C-130 Hercules in 1:48 scale. The name defines them as the mid type, that is one of the variants of wheels that appeared on this machine. Which particular version of the subject the wheels match and how many pieces the package holds, look for in the manufacturer's instructions. Before buying it is worth comparing the wheels with your particular kit, because the diameter of the axle and the seating in the fork differ between individual releases.
When choosing a glue, go by the information about the material on the package and by the manufacturer's instructions; cement for polystyrene will bond only parts made of polystyrene. Cut the surplus material off with a sharp blade a little away from the part and carefully sand the remainder down so that the tread pattern of the tire comes to no harm. Wash and degrease the parts before painting, as otherwise the coat peels off a smooth surface.
A set of wheels is supplied. The kit of the aircraft, paints and glue are usually not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
