LAST CHANCE! 20% OFF Ends Tonight!

1:48 Decal Fw-190 F-8 / A-8 (Luftwaffe black 2)

The decal sheet HAD models 1:48 Fw 190 F-8 and A-8 holds the markings of the machine with the tactical number black 2 and is intended for a model in 1:48 scale.

Scale1:48
Manufacturer HAD models
Product EAN8591111723589

Responsibility details are not available.

6.36 €
5.26 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

HAD models decals 1:48, Fw 190 F-8 and A-8

A decal sheet in its own right from the Hungarian manufacturer HAD models for a model of the Focke-Wulf Fw 190 in the F-8 and A-8 versions. According to the name it is devoted to the machine with the tactical number black 2. The sheet is applied to a finished, sprayed model and replaces or supplements the decals supplied with a kit.

What the sheet solves

Decals from a specialist manufacturer tend to be thinner and to follow engraving and rivets better than sheets from ordinary boxed releases. They also come into their own where the original decals have yellowed or break up during application. In substance these are the period markings of the machine named, transferred to a model according to the enclosed drawing.

The real subject

The Focke-Wulf Fw 190 was a single-engine fighter with a BMW 801 radial engine, marked by a sturdy structure, wide-track landing gear and good handling in roll. The A-8 version was among the most numerously built fighter patterns, and the F-8 version came from the same basis and was adapted for attacks on ground targets, that is with strengthened protection and racks under the fuselage and the wing.

How to apply the decals

Varnish the model with gloss clear coat so that no air bubbles form under a decal. Cut the decal out as close to the printing as possible, dip it in lukewarm water for a few seconds and once it releases slide it into place. Fine-tune the position with a brush and water, soak the surplus up and use a softener where there is engraving. Finally unify the surface with a matte or satin varnish.

Who the sheet is for

  • builders of Fw 190 models in 1:48 scale
  • modelers who want better decals than those from an old box
  • anyone interested in radial-engined aircraft of the Second World War period
  • collectors who build several versions of the same type side by side

The package holds the decal sheet only. The kit, paints and varnishes are not included.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. The product is a decal sheet in its own right, meant for an Fw 190 model in 1:48 scale that is already built.

The A-8 is the fighter pattern, and the F-8 comes from it adapted to work against ground targets, with strengthened protection and racks.

Yes, the model itself, paints and varnishes. We recommend gloss clear coat under the decals, a softener and a matte varnish to unify the surface.

Yes, as long as it is an Fw 190 in 1:48 scale of the matching version and the surface of the model is smooth and varnished.

Last seen

HAD modelsHAD481151:48

1:48 Decal Fw-190 F-8 / A-8 (Luftwaffe black 2)

The decal sheet HAD models 1:48 Fw 190 F-8 and A-8 holds the markings of the machine with the tactical number black 2 and is intended for a model in 1:48 scale.
In stock
6.36 €
Quinta StudioQD480791:48

1:48 FW 190A-3 3D-Printed & coloured Interior on decal paper (for Eduard kit)

Quinta Studio 1:48 Focke-Wulf Fw 190A-3 - 3D interior decals offer a color three-dimensional cockpit for Fw 190A-3 models with relief on the instrument panel and the side consoles. The set is cut for the Eduard kit.
In stock
13.56 €
Dead DesignNM721791:72

1:72 Buccaneer S.2B (2020 Release) - national insignias & stencils Airfix

1:72 Buccaneer S.2B national insignias and stencils lets the British national markings and the small lettering be laid on in paint.
In stock
7.96 €
Gecko Models35GM00851:35

1:35 Canadian Ram Mk II Kangaroo APC (Late Production)

An injection-molded plastic kit of the Ram Mk.II Kangaroo APC (late production) in 1:35 scale from the maker Gecko Models — the Canadian armored personnel carrier with a full interior.
In stock
49.96 €
1:32 Seatbelts RFC WWI STEEL-25 %Stock ClearanceFavorite
EduardED328881:32

1:32 Seatbelts RFC WWI STEEL

Eduard 1:32 Royal Flying Corps seat belts of the First World War STEEL is a set of pre-colored steel photo-etched belts for the cockpits of First World War aircraft.
Last one!of 2
10.40 €7.80 € You save 2.60 €
148 A5M4 Claude double-sided painting mask for Wingsy kits
-20 %
Favorite
Art ScaleASKM48046

148 A5M4 Claude double-sided painting mask for Wingsy kits

A double-sided painting mask in 1:48 scale for a model of the Mitsubishi A5M4 Claude from the Wingsy Kits kit.
In stock
7.96 €6.37 € You save 1.59 €
FujimiFU038601:24

1:24 Nissan Laurel Hardtop 2000 4Dr Medalist (C230)

The Fujimi 1:24 Nissan Laurel Hardtop 2000 4Dr Medalist (C230) plastic kit captures the four-door hardtop Japanese sedan of the 1970s.
In stock
37.56 €
Dead DesignNM321021:32

1:32 Bf 109 G-2 / G-4 - In & Out (for Revell Kits)

An extended set of masking shapes for the early Gustav versions in 1:32: cut pieces for the face as well as the reverse of the glazing. Intended for the Revell model, they come into their own above all on a build with the canopy slid back.
In stock
11.56 €
ArmoryARAW320021:32

1:32 Mikoyan ?iG-23ML,MLA,MLD,P(late),UM wheels

A set of replacement wheels for models of the MiG-23 in the ML, MLA, MLD, late P and two-seat UM versions, 1:32 scale.
In stock
12.76 €
1:48 Wellington Mk.I exterior for Trumpeter
-20 %
Favorite
EduardED485481:48

1:48 Wellington Mk.I exterior for Trumpeter

Eduard 1:48 Wellington Mk.I - exterior is a photo-etched set for refining the outer surfaces of a model of the Vickers Wellington Mk.I bomber.
In stock
15 €12 € You save 3 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.