LAST CHANCE! 20% OFF Ends Tonight!
1:48 Sd.Kfz.251 Stuka Zu Fuss conv. AFV and TAMIYA

1:48 Sd.Kfz.251 Stuka Zu Fuss conv. AFV and TAMIYA

30.80 €
Add to Cart

1:48 Sd.Kfz.251 Stuka Zu Fuss conv. AFV and TAMIYA

1:48 Sd.Kfz. 251 Stuka zu Fuss conversion set is a resin accessory for a kit you have already bought, not a model in its own right. It adds the Wurfrahmen 40 side frames for launching rockets to the half-track carrier.

Scale1:48
Manufacturer Hauler
Product EAN8591111782869

Responsibility details are not available.

30.80 €
25.45 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Sd.Kfz. 251 Stuka zu Fuss conversion in 1:48 scale

A resin conversion set from the Czech maker Hauler. It makes it possible to build from the model of the German Sd.Kfz. 251 armored half-track the variant with Wurfrahmen 40 frame launchers carried on the sides of the hull. For this configuration the unofficial designation Stuka zu Fuss caught on. The set is an accessory for a plastic kit, which the modeler buys separately, and without it the model cannot be built.

The real subject

The Wurfrahmen 40 were simple welded frames carrying transport crates with rocket ammunition on the sides of the hull. The rockets were launched from the crates themselves, without a separate barrel, which simplified the whole installation markedly. Aiming was done by turning the whole vehicle and setting the elevation of the frame, so accuracy was low and the effect relied on firing a whole salvo. The vehicle kept its original role as a carrier; the frames were additional equipment, not a rebuild of the hull.

Extent of the work on the kit

A conversion set is something other than a detail set. Expect cutting and drilling into the plastic model: the frames have to be seated in an accurate position and symmetrically on both sides, the original items on the sides of the hull are usually removed and mountings added. It pays to assemble the whole installation dry first and line it up by the side view, because frames seated asymmetrically are visible on a finished model at once. First wash the resin parts free of release agent in warm water with detergent, cut the casting blocks off with a fine-toothed saw and sand wet or with protection for your breathing. It is bonded exclusively with super glue; on larger areas epoxy is surer. Apply a primer before painting, which unifies the resin with the plastic.

Who the set is for

  • experienced builders of German Second World War vehicles in 1:48 scale
  • modelers who already have work with resin behind them
  • those who want a less usual variant of the carrier in their collection
  • dioramas where the vehicle is to have a clearly given role

This is a resin conversion set, not a kit of the vehicle. The base model, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

A detail set refines what a model already has. A conversion changes the variant of the vehicle, so it usually calls for cutting off the original parts, drilling and seating new assemblies accurately.

It is not. Without the plastic kit of the carrier, which you buy separately, you will not be able to use the set.

It was an unofficial nickname for a half-track carrier fitted with Wurfrahmen 40 side frames for launching rocket ammunition.

Rather not. Working with resin, cutting into plastic and seating the frames symmetrically assume experience of several ordinary builds.

Last seen

HaulerHLX482861:48

1:48 Sd.Kfz.251 Stuka Zu Fuss conv. AFV and TAMIYA

1:48 Sd.Kfz. 251 Stuka zu Fuss conversion set is a resin accessory for a kit you have already bought, not a model in its own right. It adds the Wurfrahmen 40 side frames for launching rockets to the half-track carrier.
In stock
30.80 €
1:48 North-American P-51B/P-51C Mustang Malcolm Hood canopy -25 %Stock ClearanceFavorite
EduardEX10521:48

1:48 North-American P-51B/P-51C Mustang Malcolm Hood canopy

1:48 North-American P-51B/P-51C Mustang Malcolm Hood canopy is a set of Eduard masks for Mustangs with the bulged British Malcolm Hood canopy.
4 leftof 8
6.80 €5.12 € You save 1.68 €
AberABR72L081:72

1:72 Soviet tank barrel 85cm ZIS-S-53 L/54,6 T-34/85

A turned metal barrel of the 85mm ZIS-S-53 gun for a model of the T-34/85 tank in 1:72 scale. It replaces the plastic barrel from a kit.
In stock
3.16 €
AberABR700L351:700

1:700 Set of barrels for Italian Battleship

A set of turned barrels for an Italian battleship in 1:700 from the maker Aber. A metal replacement for the plastic barrels of the main, secondary and dual-purpose armament.
In stock
17.96 €
1:48 Fairey Fulmar Mk.I seatbelts STEEL-25 %Stock ClearanceFavorite
EduardFE14101:48

1:48 Fairey Fulmar Mk.I seatbelts STEEL

A set of Eduard etched steel seat belts for the Fairey Fulmar Mk.I in 1:48 scale replaces belts that are missing or only suggested in both seats.
9 leftof 10
6.80 €5.12 € You save 1.68 €
1:32 F-16A/B Netz chaff/flare dispensers and antennas
-20 %
Favorite
Aires/QuickboostQB320601:32

1:32 F-16A/B Netz chaff/flare dispensers and antennas

Quickboost chaff and flare dispensers and antennas for the F-16A and F-16B Netz in 1:32 scale. Resin accessories from Aires for the Israeli version of the F-16.
In stock
6.36 €5.09 € You save 1.27 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.