A 1:72 masking set for the cockpit glazing of the Me P1103 model is an accessory to a kit you have already bought, not a model. The self-adhesive masks follow the shape of the canopy frames, so the frames can be sprayed without laboriously cutting tape.
Responsibility details are not available.
This is not a kit. It is a set of self-adhesive masks from the Czech maker Brengun, intended for the cockpit glazing of the plastic kit of the Me P1103 aircraft in 1:72 scale named in the product title. The masks are pre-cut to the shape of the individual window panels and frames of that canopy, so they fit its shape exactly.
The cockpit frames are sprayed in the fuselage color while the glazing has to stay clear. Cutting strips of tape by hand under a magnifier is slow and on curved canopies inaccurate: the edge frays, paint seeps under and an overspray on the glazing is hard to remove. Pre-cut masks shorten this part of the build to a few minutes and give a sharp transition that shows on a model at first glance.
First wash the glazing in lukewarm soapy water and let it dry so that a mask will hold. Lift the individual masks off the sheet with the tip of a scalpel or with tweezers and lay them on dry; press them down with a toothpick all the way round, especially in the corners. Spray the paint in several thin coats, as a heavy coat will seep under the edge of a mask. It works well to spray the interior color first and then the covering fuselage shade. Lift the masks as soon as possible after they have dried, under the tip of a scalpel and with a diagonal pull back over themselves, not straight up.
This is a masking accessory, not a model. The kit, paints and glue are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
