A braided air hose about 3 meters long with a moisture trap connects the airbrush to a compressor and catches the condensate before it reaches the spray.
Responsibility details are not available.
This air hose from AMMO by Mig Jimenez connects the airbrush to a source of compressed air and in addition it is fitted with a moisture trap. That catches the water condensed out of the compressed air, so that no droplets which spoil the paint surface get into the spray. The length corresponds to about 10 feet, that is roughly 3 meters. The outer braiding increases the durability of the hose.
For modelers who spray with an airbrush and want to be sure that no condensed water gets into the spray, especially with compressors without a trap of their own. Before buying, check that the threads of the couplings match your equipment.
This is an airbrush accessory, not a paint and not the whole tool. The dimensions are given approximately, after conversion from inch units.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
