1:24 Sir Didymus & Ambrosius

Sir Didymus and Ambrosius is a resin figure assembly in 1:24 scale from Brokentoad Resin Cast. It is supplied as an unpainted casting.

Scale1:24
Manufacturer Brokentoad Resin Cast
Product EAN8591111032940

Responsibility details are not available.

47.96 €
39.64 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Sir Didymus and Ambrosius, a resin figure in 1:24 (Brokentoad Resin Cast)

A figure assembly in cast resin in 1:24 scale that, according to the name, brings together two figures of a single scene. It is not a kit in the usual sense: the parts are cleaned up, put together and prepared for paint, and from there on it is the work of a painter. A smaller scale than that of busts means you work with the whole figure including its stance and proportions rather than with the face alone, and that the detail has to be suggested more sparingly.

Preparing the casting

Wash the parts in lukewarm water with a drop of detergent and let them dry completely, otherwise the primer will not hold. Cut the casting blocks off with a saw or a knife and level the area left behind with fine abrasive paper; sand resin wet and with respiratory protection. Look for the parting lines under side lighting, as they are easy to miss on the smaller parts. Always try the fit dry, and only then glue with cyanoacrylate glue. Fill the seams with modeling filler and sand them perfectly smooth, so that no trace of a joint is left on the finished figure.

Painting and putting the scene together

After a thin primer, work out the color composition of the two figures: leave one the leading role with higher contrast and let the other support it with a more muted treatment. In 1:24 scale build the tones in thin coats, but with a somewhat stronger difference between light and shadow, otherwise the figure flattens out at a distance. Deal with the face and the tiny eyes early, while the part can still be turned freely. A dry brush draws out fur and rough surfaces, and a wash into the folds the textiles and the straps. It is practical to paint the individual parts separately and to put them together only at the end; the whole then goes onto the base.

Who the figure is for

  • Figure painters who want to work with a multi-figure scene
  • Collectors of fantasy figure work
  • More experienced modelers used to resin
  • Exhibitors looking for a storytelling piece for a cabinet

The figure is supplied unassembled and unpainted. Paints, primer and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not, it is supplied as an unpainted resin casting and the modeler does the painting.

Paint the parts separately while they can still be turned freely, and put them together only at the end. Leave one figure the leading role with higher contrast.

The number of parts and the height of the figure are stated on the box. The scale is 1:24.

Yes. In a smaller scale you work with the whole figure and the contrast between light and shadow has to be somewhat stronger, so that the figure does not flatten out at a distance.

Last seen

Brokentoad Resin CastJHC0061:24

1:24 Sir Didymus & Ambrosius

Sir Didymus and Ambrosius is a resin figure assembly in 1:24 scale from Brokentoad Resin Cast. It is supplied as an unpainted casting.
In stock
47.96 €
Number FiveN5-C033

Panigale Red

The Panigale Red paint from Number Five aims at the brand red of the Ducati Panigale superbikes from Bologna.
In stock
5.96 €
AML DecalsAMLC1440191:144

1:144 Czechoslovak pilots in Ilyushin Il-2M3 Part II

1:144 Czechoslovak pilots in Ilyushin Il-2M3, Part II is a set of waterslide decals with the markings of Ilyushin Il-2M3 ground-attack aircraft flown by Czechoslovak pilots.
In stock
2.76 €
Nunu ModelsPN240321:24

1:24 Mitsubishi Lancer Turbo '85 Hong Kong-Beijing Rally

The Mitsubishi Lancer Turbo in the version for the Hong Kong to Beijing rally of 1985 as a plastic kit in 1:24 scale from the Nunu Models brand.
In stock
51.96 €
1:48 Westland Sea King HAS.5 LooKplus-25 %Stock ClearanceFavorite
EduardED6442571:48

1:48 Westland Sea King HAS.5 LooKplus

The widened set Westland Sea King HAS.5 LooKplus in 1:48 scale from the Czech maker Eduard. A resin instrument panel completed by further parts for the cockpit.
Last one!
29.80 €22.36 € You save 7.44 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.