29.–30. 10. z technických důvodů zavřeno. / Closed 29–30 October for technical reasons.

1:100 Grumman A-6A Intruder

Grumman A-6A Intruder in 1:100 scale is a plastic kit from the Japanese manufacturer Tamiya in the Combat Plane series — a compact model of the carrier attack aircraft with the option of building it standing or in flight.

Scale1:100
Manufacturer Tamiya
Product EAN8591111641326

Responsibility details are not available.

5.56 €
4.60 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Grumman A-6A Intruder 1:100 — Tamiya, the Combat Plane series

An injection-molded plastic kit from the Japanese manufacturer Tamiya in the small Combat Plane series in 1:100 scale. The model is of a size appropriate to the scale, so it can be built in one or two evenings, and yet it captures the characteristic shape of the aircraft from the bulky nose section to the slender wing. The set offers the choice of building the aircraft standing on its landing gear or in flight with the landing gear retracted, and it contains parts for external stores. The finished model is roughly 164 mm long.

The real subject

The A-6 Intruder was a carrier attack aircraft of the US Navy, brought into service in 1963. The crew of two sat side by side, two turbojet engines provided the power, and the whole point of the machine was the ability to hit a target in bad weather and at night, that is, at times when conventional day attack aircraft could not fly. The bulky nose with the navigation and targeting equipment and the large carrying capacity of the stations matched that. The A-6A version was the first production form of the type, and its service took it above all over Southeast Asia.

Building and painting tips

The small scale forgives less than it seems: sand the joints of the fuselage halves and the leading edges of the wing carefully, and restore the engraved lines afterwards, otherwise the seams will stand out once the paint is on. Use liquid cement for plastic applied with a fine brush so that it does not run onto the surfaces. Spray the model with a primer before painting, and only then apply the classic two-tone naval combination of a light underside and gray upper surfaces. Prepare a gloss intermediate coat for the decals so that they do not silver, and fix the result with a matte or semi-gloss varnish. In this scale it is enough to bring out the cockpit with a dark wash.

Who the model is for

  • For collectors who build aircraft in small scales and have to manage the room in a display case
  • For modelers who want a quick and pleasant build without weeks of work
  • For fans of the carrier aviation of the US Navy
  • For less experienced builders as a reasonably undemanding step forward

The model is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The finished model is roughly 164 mm long, so it fits comfortably even into a smaller display case.

Yes. The set allows a choice between building it on its landing gear and building it in flight with the landing gear retracted.

Yes, in its scope it is among the undemanding ones. All it takes is cleaning the parts up properly and a little patience with the engraved detail, which is fine in this scale.

Yes, parts for external stores are included. The exact make-up and the number of pieces are not stated here.

Last seen

TamiyaTA616061:100

1:100 Grumman A-6A Intruder

Grumman A-6A Intruder in 1:100 scale is a plastic kit from the Japanese manufacturer Tamiya in the Combat Plane series — a compact model of the carrier attack aircraft with the option of building it standing or in flight.
In stock
5.56 €
77propellerPRP70711:48

1:48 Depth Charge Mk.XVII with Bomb Rack

Depth Charge Mk.XVII with Bomb Rack (1:48) is a 3D-printed resin set of aircraft ordnance in 1:48 scale.
In stock
11.16 €
TechmodTECH720601:72

1:72 General Dynamics F-16C/D Block 52+

Five Polish F-16 aircraft of the Block 52 plus version on a sheet in 1:72. Four single-seat and one two-seat machine from the home base near Poznan, states of the years 2006 and 2010.
In stock
4.76 €
HaulerHLX482211:48

1:48 STEYR 1500 Pritsche (TAMIYA)

The Hauler 1:48 Steyr 1500 Pritsche conversion is a conversion set for the flatbed version of the Steyr 1500 truck. It is an aftermarket accessory, not a model in its own right. Target kit: Tamiya.
In stock
25.96 €
Dead DesignNM481291:48

1:48 F4F-4 Wildcat (Eduard)

Pre-cut masking templates for the frame of the glazing of the cabin of the F4F-4 Wildcat in 1:48 scale . They cover the areas of glass and leave only the frame uncovered, which is then sprayed in the same color as the airframe of the model. Intended for the Eduard kit.
In stock
7.16 €
EduardBIG493201:48

1:48 F-104S ASA Starfighter

Eduard Big Ed 1:48 F-104S ASA Starfighter is a bundle of several photo-etched sets and a masking set for finishing a model of the Italian upgraded ASA version in 1:48 scale completely.
In stock
20 €
1:48 Grumman TBF-1C Avenger LooK-25 %Stock ClearanceFavorite
EduardED6442441:48

1:48 Grumman TBF-1C Avenger LooK

The resin instrument panel Eduard LööK for the Grumman TBF-1C Avenger in 1:48 scale goes into the cockpit finished and painted. It is an accessory for a kit, not a model.
Last one!of 7
13.80 €10.36 € You save 3.44 €
TrumpeterTR055771:35

1:35 JGSDF Type 75 155mm Self-Propelled Howitzer

Trumpeter JGSDF Type 75 155mm is a plastic kit of the Japanese self-propelled howitzer in 1:35 scale.
In stock
39.96 €
AK interactiveMCHD008

AK 3GEN T-SHIRT-L

An AK Interactive 3rd Generation cotton T-shirt, size L — modeling clothing with the company motif.
In stock
19.96 €
CMKCMK40681:48

1:48 Hs 129B - exterior set for HAS

CMK Hs 129B, exterior set 1:48 is a resin detail set refining the external surface features of the German Henschel Hs 129 ground-attack aircraft.
In stock
20.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.