29.–30. 10. z technických důvodů zavřeno. / Closed 29–30 October for technical reasons.

1:48 F-104S ASA Starfighter

Eduard Big Ed 1:48 F-104S ASA Starfighter is a bundle of several photo-etched sets and a masking set for finishing a model of the Italian upgraded ASA version in 1:48 scale completely.

Scale1:48
Manufacturer Eduard
Product EAN7777777777777

Responsibility details are not available.

20 €
16.53 € without VAT
1 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Eduard Big Ed 1:48 F-104S ASA Starfighter

Big Ed is a pack of accessory sets, not an aircraft kit. The Big Ed range from the Czech maker Eduard brings several separately sold photo-etched sets and a masking set for the same model together into one box. The modeler thus gets interior detail, exterior detail and masks in a single purchase and does not have to put the combination together alone. Watch out for the right choice of version: this item is cut for the ASA version, not for the base F-104S nor for the later ASA-M standard, which are separate packs of the same range. The particular make-up of the pack and the number of parts are stated on the box.

The real subject

The Lockheed F-104 Starfighter is a single-engine supersonic aircraft with a very small trapezoidal wing with a sharp leading edge and with the horizontal tail surface set high on the fin. The F-104S version was the license-built Italian variant reworked to carry medium-range guided missiles and fitted with a matching radar. The ASA designation refers to a later Italian upgrade program aimed at updating the radar and the weapon systems; outwardly it differs from the base version only in details, which makes it all the more important to reach for the set for the right standard when building.

Building tips

Cut the photo-etched parts off on a hard surface, make the bends over an edge or in a bending tool and anneal larger areas briefly before forming. Degrease the metal and spray it with a primer suited to metal, otherwise the paint will flake off in time. Glue with cyanoacrylate glue in small drops. Finish the interior and the instrument panel before you close the fuselage up. Stick the masks on a clean and degreased canopy, spray the paint in thin coats and pull the mask off shortly after it has dried. On a Starfighter it also pays to give attention to the leading edges of the wing, which are very thin in 1:48 scale and easily damaged in handling.

Who the pack is for

  • Modelers who want to finish the model to the maximum in a single purchase
  • Builders with experience of photo-etch and cyanoacrylate glue
  • Anyone interested in the Italian Starfighter in the ASA standard
  • Those who want the interior, the exterior and the masks together in one box

These are accessory sets, not a kit. The model, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. Big Ed is a pack of accessory sets; the plastic kit has to be bought separately.

This one is meant for the ASA version. Separate packs exist for the base F-104S and for the ASA-M standard. Choose according to the version you are building.

The exact make-up is stated on the box. The Big Ed range generally brings together several photo-etched sets and a masking set for one model.

Working with photo-etch is more demanding than building in plastic. We recommend having a few models behind you and basic tools including tweezers and cyanoacrylate glue.

Last seen

EduardBIG493201:48

1:48 F-104S ASA Starfighter

Eduard Big Ed 1:48 F-104S ASA Starfighter is a bundle of several photo-etched sets and a masking set for finishing a model of the Italian upgraded ASA version in 1:48 scale completely.
In stock
20 €
1:48 Grumman TBF-1C Avenger LooK-25 %Stock ClearanceFavorite
EduardED6442441:48

1:48 Grumman TBF-1C Avenger LooK

The resin instrument panel Eduard LööK for the Grumman TBF-1C Avenger in 1:48 scale goes into the cockpit finished and painted. It is an accessory for a kit, not a model.
Last one!of 7
13.80 €10.36 € You save 3.44 €
TrumpeterTR055771:35

1:35 JGSDF Type 75 155mm Self-Propelled Howitzer

Trumpeter JGSDF Type 75 155mm is a plastic kit of the Japanese self-propelled howitzer in 1:35 scale.
In stock
39.96 €
AK interactiveMCHD008

AK 3GEN T-SHIRT-L

An AK Interactive 3rd Generation cotton T-shirt, size L — modeling clothing with the company motif.
In stock
19.96 €
CMKCMK40681:48

1:48 Hs 129B - exterior set for HAS

CMK Hs 129B, exterior set 1:48 is a resin detail set refining the external surface features of the German Henschel Hs 129 ground-attack aircraft.
In stock
20.36 €
GaahleriGAA-41499

Airbrush Main Lever C-Type Ace Series

Airbrush Main Lever C-Type Ace Series is a replacement Gaahleri control lever with the C profile, intended for the airbrushes of the Ace line.
In stock
13.56 €
TamiyaTA87092

Finishing Abrasives P180 (3pcs)

Tamiya Finishing Abrasives P180 is a set of three sheets of abrasive paper in P180 grit for modeling work on plastic, metal and wood, dry as well as wet.
In stock
1.56 €
Hobby DesignHD03-04561:24

1:24 18inch Vorsteiner FF-102 Wheels Set (4 Wheels)

1:24 18inch Vorsteiner FF-102 Wheels Set (4 Wheels) is a wheel set from Hobby Design. The name gives four pieces and a pattern taken over from the range of the American brand Vorsteiner.
In stock
17.16 €
MontexMXMM320061:32

1:32 F4U1D Corsair

A set of masks for a model of the Vought F4U-1D Corsair from Trumpeter. The cockpit glazing is covered on the outer and the reverse face and three masks stand in for the American stars.
In stock
8.76 €
Special HobbySH725421:72

1:72 Junkers Ju 87D-1/3 ‘Combat & Captured’

Junkers Ju 87D-1/3 Combat and Captured 1:72 is a plastic kit of the legendary German dive bomber from Special Hobby, completed with photo-etched and 3D-printed parts and a generous set of decals for both combat and captured machines.
In stock
22.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.