1:32 F-15C Early/F-15A/F-15J early 3D-Printed & coloured Interior on decal paper (Tamiya)

1:32 F-15C Early/F-15A/F-15J early 3D-Printed & coloured Interior on decal paper (Tamiya)

35.16 €
Add to Cart

1:32 F-15C Early/F-15A/F-15J early 3D-Printed & coloured Interior on decal paper (Tamiya)

Colored interior decals in 1:32 scale for models of the F-15C Early, the F-15A and the early F-15J. They are applied over a gloss base and replace the flat kit parts.

Scale1:32
Manufacturer Quinta Studio
Product EAN8591111427098

Responsibility details are not available.

35.16 €
29.06 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

F-15C Early, F-15A and early F-15J – interior decals 1:32

This is a colored decal set for the interior of a model of the F-15 in 1:32 scale, intended according to the name for the early forms of the F-15C and the F-15A and for the early F-15J. It is not a kit but an accessory: a print with a three-dimensional effect is applied to model parts that have already been built and painted. This is the full version of the set; alongside it there is also a smaller version.

The real subject

The F-15 Eagle is a twin-engine fighter with a high thrust-to-weight ratio and a large wing area. The A version was the original single-seat variant, the C brought further development and the F-15J is the licensed Japanese form. The early cockpit configuration differs from the later one in the arrangement of the instruments, which is why a number of decal sets distinguish the early and late forms.

How the set is applied

Preparation of the surface decides the result. Overcoat the painted part with gloss varnish; on a matte surface air remains under the film and the edges of the decal show through with a silvery look. Release the decal after about fifteen seconds in lukewarm water, move it into place and blot up the excess water. Do not use a decal softener or setting solution; their chemicals would damage the printed resin and ruin the element, and do not touch the set while it is drying. At the end unify the interior with varnish according to the sheen you want.

What the set does on the model

The set replaces the flat kit parts — from smooth plastic it makes a colored surface with a three-dimensional impression, and brush-painting the smallest areas falls away. Before application, degrease the plastic and sand down any coarse relief so that the decal settles over its whole area.

Who the set is for

  • For builders of the early versions of the F-15 in 1:32 scale
  • For modelers who want to display a model with the canopy open
  • For those who prefer a print to painting tiny details
  • As an accessory for a kit, not as a model in its own right

The set is an accessory for a kit, not a model in its own right. Paints, glue and varnishes are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

For the early form of the F-15C, for the F-15A and for the early F-15J. The late cockpit configuration has a set of its own.

It is not. This is a decal accessory for a plastic kit, which has to be obtained separately.

So that no air remains under the decal. On matte paint the edges of the film would begin to show through with a silvery look and the joint would be visible.

Once it has dried completely, overcoat the area with varnish in the degree of sheen you have chosen. That unifies the surface and protects the decal.

Last seen

Quinta StudioQD321551:32

1:32 F-15C Early/F-15A/F-15J early 3D-Printed & coloured Interior on decal paper (Tamiya)

Colored interior decals in 1:32 scale for models of the F-15C Early, the F-15A and the early F-15J. They are applied over a gloss base and replace the flat kit parts.
In stock
35.16 €
ALAMBT6

In stock
2.20 €
Mirage HobbyMIR100019

Brush

Mirage Hobby Brush 3 STANDARD is a synthetic modeling brush, size 3 — a smaller size for detail, small areas and touch-ups. This is not a kit, but a painting tool.
In stock
1.96 €
KelikRSK72-00981:72

1:72 F-15E - INTERIOR 3D DECALS FOR GWH KIT

Kelik F-15E interior 3D decals 1:72 — three-dimensional applications for the cockpit of the two-seat Strike Eagle that will replace painting instruments by hand. Intended for the GWH kit.
In stock
18.36 €
WoodlandWTR1615

Buk

A separately packed beech 10.1 cm tall, hand-finished. A specimen tree for the foreground of a scene; there is one piece in the box.
In stock
28.76 €
1:32 F-15C Early/F-15A/F-15J early 3D-Printed & coloured Interior on decal paper (Tamiya) (small version)-25 %Stock ClearanceFavorite
Quinta StudioQDS321551:32

1:32 F-15C Early/F-15A/F-15J early 3D-Printed & coloured Interior on decal paper (Tamiya) (small version)

Interior decals in 1:32 scale for early F-15C, F-15A and F-15J aircraft, the small version of the set. They are applied over a gloss base and replace the flat parts of the kit. The set is intended for the Tamiya kit.
2 leftof 6
21.56 €16.16 € You save 5.40 €
BlackSnake ModelUSMC-121:35

1:35 US Marines 12 - Operation Iraqi Freedom

BlackSnake Model 1:35 US Marines 12: Operation Iraqi Freedom is a resin 3D printed figure of a modern American marine for a diorama in 1:35 scale.
In stock
11.96 €
C-1568

mini van

In stock
9 €
BlackSnake ModelSOVIET-041:35

1:35 Red Army WWII Soldier No.1 (1 Figure)

1:35 Red Army WWII Soldier No.1 is a resin, 3D-printed figure of a Soviet Red Army infantryman for a diorama. One figure, intended for experienced modelers.
In stock
11.96 €
DN ModelsDN32/827-0761:32

1:32 B-17G Flying Fortress Yellow Tails Insignia Paint Mask Set

1:32 B-17G Flying Fortress Yellow Tails Insignia Paint Mask Set contains three sheets of masks for the marking of three particular Flying Fortresses of the Eighth Air Force.
In stock
29.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.