LAST CHANCE! 20% OFF Ends Tonight!
1:144 AS-27/ARN-5 Antenna for B-25/B-17 bombers (4pcs)

1:144 AS-27/ARN-5 Antenna for B-25/B-17 bombers (4pcs)

5.16 €
Add to Cart

1:144 AS-27/ARN-5 Antenna for B-25/B-17 bombers (4pcs)

Brengun 1:144 photo-etched AS-27/ARN-5 antennas for the B-25 and B-17 bombers contain four pieces of fine metal antennas that replace coarse plastic parts. It is a detail accessory to a kit.

Scale1:144
Manufacturer Brengun
Product EAN8591111275682

Responsibility details are not available.

5.16 €
4.26 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Photo-etched AS-27/ARN-5 antennas for the B-25 and B-17, 1:144, Brengun

A set of fine photo-etched parts in thin metal sheet, intended for American twin-engine and four-engine bombers in 1:144 scale. The package contains four pieces of the AS-27/ARN-5 type antenna, that is, a mast antenna with crossbars of the kind that appeared on the fuselage of these aircraft. Injected plastic cannot manage a structure this thin in a small scale, and the parts from the box tend either to be too thick or to be missing entirely. Photo-etched metal has both the right thickness and a sharp outline. It is an accessory to a kit, not a standalone model.

The real subject

Antennas of this type belonged to the radio equipment of American bombers of the Second World War and were connected with the receiver of a landing guidance system. On both the B-25 Mitchell and the B-17 Flying Fortress it was a small but prominent detail on the surface of the fuselage that is clearly visible in period photographs. It is precisely such small things that set a model built straight from the box apart from a machine that looks convincing even from close up.

Building and painting tips

Separate the photo-etched parts with a sharp scalpel or photo-etch scissors on a hard surface and never tear them out with your fingers, as they would bend. Sand the remainder of the tab lightly with a small file or a sanding sponge after separation. Do the forming with flat tweezers or a small bending jig, as the metal is thin and will take only one accurate bend. It is bonded with super glue applied with the tip of a pin, so that the drop does not run over the surface. The metal is smooth, so apply a primer before painting, otherwise the paint will rub off during handling. We recommend fitting the antennas only once the painting and varnishing of the fuselage are complete, so that they do not break off.

Who the accessory is for

  • Builders of American bombers in 1:144 scale
  • Modelers who want to replace coarse plastic antennas with thin metal
  • Those who build several machines at once, as four pieces will do for several models
  • More experienced modelers used to working with photo-etched parts and tweezers

The accessory is supplied unpainted and without the base kit. Glue, paints and tools are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

According to the name, four pieces. They will therefore do for several part-built models.

With a sharp scalpel or photo-etch scissors on a hard surface. Then sand the remainder of the tab with a small file so that it does not show.

Yes, we recommend it. On smooth photo-etched metal the paint holds badly without a base and rubs off during handling.

Best of all once the fuselage has been painted and varnished. They are very fine and easily break or bend during further work.

Last seen

BrengunBRL1441801:144

1:144 AS-27/ARN-5 Antenna for B-25/B-17 bombers (4pcs)

Brengun 1:144 photo-etched AS-27/ARN-5 antennas for the B-25 and B-17 bombers contain four pieces of fine metal antennas that replace coarse plastic parts. It is a detail accessory to a kit.
In stock
5.16 €
Dead DesignSM480261:48

1:48 Nakajima B6N1/2 Tenzan optical illusion paint mask for control surfaces

The Nakajima B6N1 and B6N2 Tenzan in 1:48 scale : covering for spraying with which you create the impression of hinged control surfaces on the airframe.
In stock
7.16 €
1:48 Mil Mi-4A seatbelts STEEL
-20 %
Favorite
EduardFE13631:48

1:48 Mil Mi-4A seatbelts STEEL

1:48 Mil Mi-4A seatbelts STEEL is a standalone set of pre-painted steel seat belts for the cockpit of the Mil Mi-4A helicopter in 1:48 scale from Eduard.
In stock
8 €6.40 € You save 1.60 €
1:32 Fw 190A/F/D seat with seatbelts
-20 %
Favorite
Aires/QuickboostQB323331:32

1:32 Fw 190A/F/D seat with seatbelts

A resin pilot seat with belts for the Focke-Wulf Fw 190A/F/D in 1:32 scale from Quickboost. A faithful replacement for the kit seat with cast seat belts.
In stock
6.36 €5.09 € You save 1.27 €
New WareNWAM04011:48

1:48 Mask Su-33 & J-15 Flying Shark EXH.NOZZLES

The New Ware Mask Su-33 and J-15 Flying Shark — exhaust nozzles 1:48 is a small supplementary set of masks for painting the engine nozzles on models of the Su-33 and the J-15 in 1:48 scale.
In stock
3.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.