Detailed center lock wheel nuts for a model of the Formula car listed as the RB6, in 1:20 scale.
Responsibility details are not available.
The wheels of modern Formula cars are not held on by several bolts but by a single center nut. It holds the wheel on the hub, and at a pit stop it is loosened and tightened with a single impact wrench. On a 1:20 scale model the nut stays clearly visible from outside once the wheel is on, so it is one of the details a viewer looks at first.
These are accessory center lock wheel nuts for a model of the Formula car listed as the RB6, in 1:20 scale. They replace the parts from the box, which tend to be simplified on injection-molded kits, and bring crisper edges and a finer shape. The exact number of pieces and the scope of the package are stated by the manufacturer.
The parts are small, so have a tray with a raised rim and tweezers with fine tips ready for the job. Cut the excess material off with a sharp blade a little away from the part and sand the rest so that the mating surface stays flat. Wash and degrease the parts before painting, or the paint will not hold on the smooth surface. Fit the nuts only once the wheels are on, so that their position can be lined up with the axle. The suitable glue and the rest of the procedure are given in the manufacturer's instructions.
The set is for modelers who build a Formula car in 1:20 scale for the display case and want even the small things on the wheels taken care of. The car model, the wheels, paints and glue are not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
