20% OFF SELECTED BRANDS! EDUARD, KINETIC, SPECIAL HOBBY, CMK & more

1:72 72 Paint mask Su-33 (TRUMP)

SX-Art 1:72 mask set for a model of the Su-33 carrier fighter brings masks cut to shape for the canopy glazing, which give the framing a crisp edge without cutting tape.

Scale1:72
Manufacturer SX-Art
Product EAN8591111403160

Responsibility details are not available.

7.16 €
5.92 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

SX-Art 1:72 mask set for the Sukhoi Su-33

A mask set from SX-Art in 1:72 scale for a model of the Su-33 carrier fighter. It is not a kit and not a replacement part: these are self-adhesive masks cut to shape that you stick onto the clear canopy and onto the other areas that are to stay transparent after spraying. The set is cut to the shape of one particular kit, so it follows the framing of the canopy and the tedious cutting of masking tape falls away.

The real subject

The Sukhoi Su-33 is a carrier-borne fighter derived from the Su-27. For operating off a ship's deck it received folding outer wing panels and folding tailplanes, strengthened landing gear, a tailhook and canard foreplanes ahead of the wing leading edge, which improve its behavior at low speeds. It is powered by two turbojets. Its characteristic feature is precisely this combination of canards and a large canopy, so masking the glazing is one of the most visible details of a model of the type.

How to use the masks

First degrease the clear part and let it dry perfectly; keep your fingers off the visible surface, as a print shows through the paint. Lift an individual mask off the sheet with tweezers or the tip of a scalpel, lay it on the glass and press it down from the center toward the edges so that no air bubble is left underneath. Then run a toothpick around the edge as well, because it is exactly how tightly the edge seats that decides whether the paint transition will be crisp. Spray thinly and in several coats, as a thick coat tends to tear away beyond the edge of the mask when it is peeled off. A proven sequence is to spray the interior shade of the cabin framing first and only then the covering outer color. Lift the masks off shortly after the paint has dried, not once the finish has cured completely, because after a longer time the adhesive comes away less easily.

Who the set is for

  • Modelers who want crisp canopy framing without brushwork by hand
  • Builders in small scale, where cutting tape for tiny frames is tedious
  • Those who spray with an airbrush and need a repeatably clean edge
  • Beginners, for whom masking the canopy is the hardest part of the build

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is a mask set, a set of masks cut to shape that are stuck onto the parts of the model before spraying. Neither the model itself nor paints are included in the package.

The masks are cut to the shape of the particular kit the set is intended for. On a model from another manufacturer, or on another mold of the same type, they usually do not seat accurately, so check which kit you are building first.

Lift them with tweezers at a sharp angle shortly after the paint has dried to the touch. If you wait for the finish to cure completely, the adhesive holds harder and the coat may lift with the mask.

Count on single use. Once lifted off, the edge loses its grip, and on a second application it no longer seats tightly enough to hold a crisp transition.

Last seen

SX-ArtSXA721291:72

1:72 72 Paint mask Su-33 (TRUMP)

SX-Art 1:72 mask set for a model of the Su-33 carrier fighter brings masks cut to shape for the canopy glazing, which give the framing a crisp edge without cutting tape.
In stock
7.16 €
TechmodTECH240231:24

1:24 P-47D Thunderbolt

1:24 P-47D Thunderbolt decals from the Polish manufacturer Techmod serve to mark a large model of the American fighter. It is an accessory for a finished model, not a kit.
In stock
11.96 €
ValomVAL144371:144

1:144 Handley-Page Hereford

Valom 1:144 Handley-Page Hereford is an injection-molded plastic kit of a British twin-engine medium bomber of the Second World War period in the small 1:144 scale.
In stock
17.56 €
1:48 Fairey Gannet AS.1/AS.4 national & a/c marking
-20 %
Favorite
EduardEX10181:48

1:48 Fairey Gannet AS.1/AS.4 national & a/c marking

Fairey Gannet AS.1/AS.4 - a painting mask for national and aircraft markings in 1:48 from the firm Eduard makes the accurate spraying of national insignia and codes easier, in place of decals.
In stock
9 €7.20 € You save 1.80 €
SX-ArtSXA351131:35

1:35 Paint mask FJ43 SUV (AK-INT.)

An SX-Art masking set for a model of the FJ43 SUV off-road vehicle in 1:35 scale ensures clean glazing of the cab and clean headlights with no paint crept under.
In stock
7.16 €
FIGURE RISE KAMEN RIDER GEIZ (MAQ85102P)-25 %Stock ClearanceFavorite
BandaiBAN57068

FIGURE RISE KAMEN RIDER GEIZ (MAQ85102P)

A plastic kit of a figure from the Figure Rise range with the masked hero Kamen Rider Geiz as its subject.
Last one!
35.96 €26.96 € You save 9 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.