GAS HANS spherical rivets 0.7 mm are fine 3D-printed resin rivets with a domed head for superdetailing models. The 0.7 mm figure is the diameter of the part, not a scale.
Responsibility details are not available.
A set of fine, 3D-printed resin rivets with a spherical (domed) head 0.7 mm across, from GAS HANS. They serve to detail model surfaces precisely, replacing or rounding out the riveting on fuselages, panels, landing gear or tanks. The 0.7 mm figure gives the size of the rivet head; it is not the scale of a model.
Separate the individual rivets carefully and seat them in a pre-drilled hole of matching diameter, then fix them with a drop of cyanoacrylate glue (super glue). Work with tweezers, and protect your airways when separating and sanding. Once glued on, the surface can be sprayed with primer and paint. Given the size of the parts, we recommend good light and, if need be, magnification.
For advanced modelers and competition builders who want the most faithful surface possible. It is neither a kit nor a paint but a fine detail accessory.
Supplied unpainted. Glue and tools are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
