20% OFF SELECTED BRANDS! EDUARD, KINETIC, SPECIAL HOBBY, CMK & more
1:32 Bf 109 G5 - G14, K armament set (MG 131 tips) & Pitot Tube

1:32 Bf 109 G5 - G14, K armament set (MG 131 tips) & Pitot Tube

6.76 €
Add to Cart

1:32 Bf 109 G5 - G14, K armament set (MG 131 tips) & Pitot Tube

1:32 Bf 109 G-5 to G-14 and K, MG 131 machine gun tips and pitot tube is a metal set for the late Messerschmitt versions in 1:32 scale. It serves as an accessory to a finished kit, not as an aircraft model.

Scale1:32
Manufacturer MASTER
Product EAN8591111124423

Responsibility details are not available.

6.76 €
5.59 € without VAT
6 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

1:32 Bf 109 G-5 to G-14 and K, MG 131 machine gun tips and pitot tube (MASTER)

A metal set from the Polish brand MASTER with turned MG 131 machine gun tips and a pitot tube for the late Bf 109 versions in 1:32 scale. It is not a kit but a detail accessory to a plastic model, which you obtain separately.

How to recognize the right version

From the G-5 version the Bf 109 received heavier 13 mm machine guns above the engine in place of the earlier light 7.92 mm weapons. The bulkier breeches did not fit under the engine cowling, and so conspicuous bulges appeared on either side ahead of the cockpit. It is by these that the late versions are recognized at first glance, and by these that you choose the right set; for the earlier F version and the early G a different one applies.

What the metal brings

Gun muzzles are clearly visible on a model in 1:32, and a plastic molding always has a solid, slightly tapered end. A metal part has a genuine bore and a sharp muzzle edge, holds a straight line and is not damaged when the surrounding area is sanded. The pitot tube on the wing is then the part that breaks most often on plastic models; in metal it survives handling of a finished model.

Fitting and finishing

Shorten the plastic guns, redrill the hole to the diameter of the pin and check the depth and axis dry. Bond with a minimal drop of super glue applied into the hole, not onto the part. Degrease the metal with alcohol and spray it with a primer for metal, otherwise the paint rubs off. Leave the muzzles in bare metal and merely darken them gently with graphite, or use a bluing agent; it holds on metal better than paint and does not clog the bore. Fit the thinnest parts only after the decals and the varnish.

Who the set is for

  • Builders of late Bf 109 versions G and K in 1:32 scale
  • Modelers who want sharp hollow gun muzzles
  • Those looking for a durable replacement for the fragile pitot tube
  • Anyone interested in a faithful finish to the most closely watched part of the fuselage

This is an accessory to a model, not a standalone kit. Glue, paints and the base model are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

To the late G-5 to G-14 and K versions, which carried heavier 13 mm machine guns above the engine. You will recognize them by the bulges on the engine cowling ahead of the cockpit.

You cannot; the F version and the early G had different, lighter weapons. A separate set is intended for them.

Degrease it with alcohol and apply a primer meant for metal. The gun muzzles are better left in bare metal and merely darkened gently with graphite or a bluing agent.

No. It is a separate metal accessory to a Bf 109 kit in 1:32 scale.

Last seen

MASTERAM320621:32

1:32 Bf 109 G5 - G14, K armament set (MG 131 tips) & Pitot Tube

1:32 Bf 109 G-5 to G-14 and K, MG 131 machine gun tips and pitot tube is a metal set for the late Messerschmitt versions in 1:32 scale. It serves as an accessory to a finished kit, not as an aircraft model.
In stock
6.76 €
Dead DesignNM720681:72

1:72 Sea Venom FAW.21 Nat. Insignias

Dead Design 1:72 Sea Venom FAW.21 is a set of national insignia masks. The roundels are sprayed straight onto the model, so there is no carrier film under them.
In stock
7.16 €
IBG modelsIBG72U0141:72

1:72 R4M Rockets - 3D Printed For IBG Fw 190D Family

R4M rockets for the Fw 190D 1:72 from IBG is a 3D printed set of underwing armament for the kits of the Fw 190D series. It is not an aircraft model but an accessory for one.
In stock
9.56 €
PANZER ARTGB35-1161:35

1:35 FlaKvierling 38 Gun barrels with body AA Gun (x4)

Turned barrels for the Flakvierling 38 antiaircraft quadruple mount in 1:35 scale from the brand PANZER ART. The set of four barrels with weapon bodies is an accessory for a part-built model, not a stand-alone kit.
In stock
33.96 €
1:48 Hawker Hunter F.6 double-sided painting mask for Airfix
-20 %
Favorite
Art ScaleASKM480101:48

1:48 Hawker Hunter F.6 double-sided painting mask for Airfix

The Art Scale masking templates for Hawker Hunter F.6 models in 1:48 scale are double-sided and pre-cut, ready for painting the glazing cleanly.
In stock
7.96 €6.37 € You save 1.59 €
Quinta StudioQD485251:48

1:48 A-4M early 3D-Printed & coloured Interior on decal paper (Hasegawa/Hobby2000)

A pre-colored A-4M Skyhawk early interior 3D decal in 1:48 scale from Quinta Studio: a relief cockpit decal for the Skyhawk kit. It is not an airplane model. Target kits: Hasegawa or Hobby 2000.
In stock
10.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.