1:32 DORNIER DO 335B-2 - MASKS

1:32 Dornier Do 335B-2 - masks is a masking set from HGW for the German twin-engine fighter of the end of the Second World War. It is not a model of the aircraft but self-adhesive masks that make spraying the glazing and other areas of a model in 1:32 scale easier.

Scale1:32
Manufacturer HGW
Product EAN8591111248648

Responsibility details are not available.

9.20 €
7.60 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Dornier Do 335B-2 1:32 - an HGW masking set

This item is not a kit of the aircraft. It is a masking set for a model of the German Do 335 in the B-2 version in 1:32 scale. The masks are precisely shaped self-adhesive pieces which are stuck onto the clear parts and sprayed over with paint; once lifted, a crisp boundary stays between the frame and the clear area.

Why masks and not tape - in 1:32 scale the cockpit canopy is large and the frames are long and curved. Cutting them from tape means hours of work, and one slip of the blade ruins a clear part which essentially cannot be repaired. A pre-cut mask shortens that step to a few minutes and the result is repeatable.

The real subject

The Dornier Do 335 Pfeil was a German twin-engine aircraft with an unusual arrangement of its power: one engine with a propeller was at the front in the tractor position, the second behind the cockpit drove a pusher propeller at the end of the fuselage. This tandem arrangement removed the asymmetric thrust on the failure of one engine that plagued conventional twin-engine machines, and at the same time allowed an aerodynamically clean fuselage. The B version was conceived as a heavy fighter with strengthened gun armament. The type practically never reached production service and only a small number of machines were built.

Use and tips

Wash and degrease the clear parts before masking; on a greasy surface a mask does not hold and the paint creeps under it. Move the mask with tweezers and press it down with a toothpick or a blunt point, especially in the corners. Spray thin coats; a heavy coat will create a step at the edge. Lift the mask off while the paint is only dry to the touch, not fully cured; the tip of a scalpel, with which you lift a corner of the mask, will help.

Who the set is for

  • Modelers building a Do 335 in the B-2 version in 1:32 scale.
  • Those who want crisp cockpit frames without cutting tape by hand.
  • Builders who spray with an airbrush and need a repeatable result.
  • Modelers of large scales, where every imprecision on the glazing shows.

The masks are an accessory for a kit. The kit itself and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is a masking set, an accessory for a kit. A Do 335 kit in 1:32 scale has to be obtained separately.

As soon as the paint is dry to the touch but not yet fully cured. With fully cured paint there is a risk that the edge of the finish comes away with the mask.

Degrease the part before sticking the mask on, press the mask down well especially in the corners and spray several thin coats instead of one heavy one.

The masks are cut to the shapes of a particular kit. So check the compatibility against the model you are building.

Last seen

HGWHGW6328551:32

1:32 DORNIER DO 335B-2 - MASKS

1:32 Dornier Do 335B-2 - masks is a masking set from HGW for the German twin-engine fighter of the end of the Second World War. It is not a model of the aircraft but self-adhesive masks that make spraying the glazing and other areas of a model in 1:32 scale easier.
In stock
9.20 €
Freedom Model KitsFMK180201:48

1:48 TF-20B Tiger Shark

A plastic kit of the two-seat TF-20B Tigershark in 1:48 scale from Freedom Model Kits. A model of the two-seat variant derived from the light fighter F-20, supplied unassembled and unpainted.
In stock
39.96 €
HaulerHLH720581:72

1:72 Barbed wire WW2 (ostnatý drát)

Hauler 1:72 barbed wire WW2 is a photo-etched diorama accessory, metal barbed wire of the Second World War for fences and obstacles in scenes in 1:72 scale.
In stock
7.96 €
SBS ModelSBS350361:35

1:35 Ford Model T Ambulance update set

SBS Model 1:35 Ford Model T Ambulance - detail set lifts a model of the legendary First World War ambulance with parts made finer than those in the basic kit.
In stock
17.16 €
BrengunBRS720161:72

1:72 Vought-Sikorsky VS-300

The Vought-Sikorsky VS-300 in 1:72 scale is a resin kit from the brand Brengun for experienced modelers, devoted to the experimental helicopter that established the arrangement with one main and one tail rotor.
In stock
29.96 €
Aires/QuickboostQB490181:48

1:48 F-4 Phantom II fuel dump

Quickboost 1:48 - a resin fuel dump for the F-4 Phantom II is a small replacement part for a plastic kit, not a model of the aircraft in its own right.
In stock
4.76 €
SuyataSUSK-003

Spad XIII & Rickenbacker Full Interior

The scale-free stylized kit Spad XIII and Rickenbacker Full Interior from Suyata — a foreshortened treatment of a First World War biplane with a pilot figure.
In stock
27.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.