1:32 F-14D Super Tomcat (for Trumpeter kit)

1:32 F-14D Super Tomcat is a set of 3D textured instrument panels from Red Fox Studio on decal paper, intended for both stations of the cockpit of the model in 1:32 scale. Intended for the Trumpeter kit.

Scale1:32
Manufacturer Red Fox Studio
Product EAN8591111000000

Responsibility details are not available.

31.16 €
25.75 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

F-14D Super Tomcat 1:32 - 3D instrument panels from Red Fox Studio

Colored panels with printed relief that give the cockpit of the model legible instruments without hand painting the individual gauges. The carrier is decal paper: the elements are soaked off in water, slide on the wet base and settle onto the plastic part. Nothing is glued and nothing is sanded; they are handled like decals. The set is intended for the Trumpeter kit.

What makes the F-14D cockpit special

The Tomcat has two stations one behind the other and each looks quite different. The pilot sits in front at a classic flight panel, the weapon systems officer behind, at a station that has neither full flight instruments nor a head-up display. On the D version a digital upgrade was added on top: screens took the place of some of the round dials and the rear station was given a large flat display, so the panel looks markedly different from the early Tomcats with their array of round scopes. The set therefore takes in two different panels, a pair of side consoles and the long space between the seats - all under a two-part clear canopy that leaves the interior visible along its whole length.

Soaking, positioning and decal softener

Work station by station and do not start on both at once. First seat the main panel of the front compartment, let it set and only then move to the rear; otherwise you will rumple one element while sliding the other. Keep the water lukewarm and the soak short - the film only has to release, not float. Position with a damp brush and draw the surplus water off with a cotton swab from the center toward the edges, so that no air is held under the relief. Apply decal softener only where the film will not settle into an edge or into the frame of a display, and let it work untouched. With a two-seat cockpit it pays to check that both panels line up before everything dries.

Who the set is for

  • Builders of large models with an open canopy, where both stations are visible.
  • Modelers who want to distinguish the upgraded version from the early machines.
  • More experienced users of decals and decal softener.

This is a modeling accessory, not a kit. The base model, paints and glue are not included in the package. Check in advance that it matches your kit.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Yes. The D version is digitally upgraded, screens replaced some of the round instruments and the rear station has a large flat display. A set for the early version is therefore not interchangeable.

Work station by station: first the front panel, then the rear station once it has set, and the side consoles last. That stops you rumpling the neighboring element while positioning.

No. The elements are printed on decal paper and hold by themselves. All you need is lukewarm water, a gloss varnish on the base and possibly a decal softener.

Last seen

Red Fox StudioRFSQS-320581:32

1:32 F-14D Super Tomcat (for Trumpeter kit)

1:32 F-14D Super Tomcat is a set of 3D textured instrument panels from Red Fox Studio on decal paper, intended for both stations of the cockpit of the model in 1:32 scale. Intended for the Trumpeter kit.
In stock
31.16 €
Print ScalePRSC723481:72

1:72 Hawker Hunter Royal Navy (wet decals)

Print Scale 1:72 Hawker Hunter Royal Navy is a sheet of waterslide decals with markings of Hunters operated by the Royal Navy. It holds only the decals, not a kit.
In stock
15.16 €
Model CraftPPU8174PB

Hřebíčky černé, 10 mm dlouhé, 100 ks

Black pins 10 mm, 100 pieces are small blackened modeling pins suitable for fastening parts, track and decks when building ships, dioramas and wooden models.
In stock
3.96 €
Aires/QuickboostQB722951:72

1:72 Junkers Ju 188A night exhaust

Quickboost 1:72 – Junkers Ju 188A night exhausts are a resin detail part for experienced modelers that faithfully captures the exhausts with flame dampers.
In stock
4.76 €
AiresAIR20461:32

1:32 ESCAPAC 1G-2 ejection seat - (for A-7D Corsair II)

The resin detail set Aires ESCAPAC 1G-2 ejection seat for the A-7D Corsair II in 1:32 scale replaces the stock seat with a faithful casting.
In stock
10.80 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.