LAST CHANCE! 20% OFF Ends Tonight!
1:32 Ju 87A 3D-Printed & coloured Interior on decal paper (Trumpeter)

1:32 Ju 87A 3D-Printed & coloured Interior on decal paper (Trumpeter)

29.96 €
Add to Cart

1:32 Ju 87A 3D-Printed & coloured Interior on decal paper (Trumpeter)

1:32 Ju 87A pre-colored 3D interior decals from Quinta Studio are a decal add-on to a plastic kit. The printed relief detail, already painted, is applied directly onto the parts of the model. Target kit: Trumpeter.

Scale1:32
Manufacturer Quinta Studio
Product EAN5591111000009

Responsibility details are not available.

39.96 € 29.96 €
24.76 € without VAT
−25 % You save 10 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Pre-colored 3D interior decals for the Ju 87A in 1:32 scale

This set from Quinta Studio is not a kit or a stand-alone model but an add-on. These are 3D printed and already painted decals on decal paper that are applied to the parts of a plastic model and give the interior three-dimensional, raised detail. The name does not state the particular scope of the set or the contents of the package: check them on the box. Dimensionally it is based on the Trumpeter kit.

What the set is for

The Ju 87A was the first production version of the German Junkers Ju 87 dive bomber, with fixed spatted landing gear and a two-seat cockpit. In 1:32 scale the cockpit area is clearly visible and the flat parts from the kit tend to be the first thing that spoils the overall impression of a finished model. Pre-colored 3D decals carry relief and color at the same time, so they replace work that would otherwise mean photo-etched parts, masks and several shades of paint on tiny areas.

How the set is applied

Prepare the surface smooth and coated with gloss varnish. Over a flat surface the decal dries with a silvery edge that can no longer be put right. Cut the individual elements out as closely as possible, soak them in lukewarm water for about fifteen seconds and move them into place with a soft brush. Blot up the excess water and press the element down gently with a cotton bud. Do not use a decal softener or setter; their chemistry will attack the printed resin and spoil the element. Once completely dry, the finished interior is usually gone over with flat varnish so that the gloss of the surface underneath does not shout.

Who the set is for

  • Modelers building the Ju 87A in 1:32 scale who want a three-dimensional interior without photo-etched parts.
  • Those who would rather apply finished colored detail than paint tiny instruments with a brush.
  • Builders who plan to finish the model with the cockpit open.
  • More experienced modelers used to working with decal media.

This is an add-on to a plastic kit, which the package does not contain. The model, paints, clear coat and glue are not part of the set.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is a decal add-on to a plastic kit, which the package does not contain. You have to obtain the model itself separately.

You do not need one and you must not use one. The manufacturer prohibits both a softener and a setter on this line, as their chemistry will attack the printed resin and spoil the element.

Yes, smooth and coated with gloss varnish. Over a flat surface a silvery edge will stay around the decal and it can no longer be removed.

Check the exact number of parts on the box. The set is intended for the interior of the type stated, in 1:32 scale.

For the Trumpeter kit in 1:32 scale. The plastic parts of the basic model are not included in the package.

Last seen

1:32 Ju 87A 3D-Printed & coloured Interior on decal paper (Trumpeter)-25 %Stock ClearanceFavorite
Quinta StudioQD320911:32

1:32 Ju 87A 3D-Printed & coloured Interior on decal paper (Trumpeter)

1:32 Ju 87A pre-colored 3D interior decals from Quinta Studio are a decal add-on to a plastic kit. The printed relief detail, already painted, is applied directly onto the parts of the model. Target kit: Trumpeter.
Last one!of 2
39.96 €29.96 € You save 10 €
Hobby DesignHD03-06141:24

1:24 Recaro Pro Racer RMS 2700G VR Seats

The Recaro Pro Racer RMS 2700G VR racing shell in 1:24 scale is an interior accessory with which you equip the cabin of a part-built car model.
In stock
12.76 €
Syhart DecalSY72-1191:72

1:72 EA-18G Growler A46-306 100 Years 6 Squadron RAAF 2017

EA-18G Growler A46-306, 100 Years 6 Squadron (1:72) is a sheet of wet decals from Syhart Decal for the anniversary scheme of an Australian electronic warfare aircraft.
In stock
10.36 €
Artwox ModelAW200361:700

1:700 DKM Admiral Hipper 1940 (For Trumpeter 05775)

The Artwox Model 1:700 veneer deck for the German heavy cruiser Admiral Hipper in her 1940 form replaces the plastic deck with wood with the laying of the planks printed on it. An accessory to a kit. Intended for the Trumpeter 05775 kit.
In stock
18.36 €
PolákPOL9223

Vysoké keře - střední listí - Zel. břízová 15ks

Modeling tall bushes with medium foliage in the birch green shade (15 pieces) from the firm Polak . A scenic accessory for building dioramas and a model railroad.
In stock
12.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.