1:32 OV-10A/C Bronco wing pylons

Quickboost 1:32 OV-10A/C Bronco underwing pylons are resin pylons for models of the OV-10A and OV-10C turboprop aircraft. It is a detailing accessory, not a kit of the aircraft.

Scale1:32
Manufacturer Aires/Quickboost
Product EAN8591111692298

Responsibility details are not available.

7.96 €
6.58 € without VAT
3 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Quickboost 1:32 OV-10A and OV-10C Bronco, underwing pylons

A resin detailing set in 1:32 scale from the Quickboost brand, a sub-brand of the manufacturer Aires. It contains pylons for under the wing for a model of the OV-10 aircraft in the A and C versions. The set is not a kit of the aircraft, it is an accessory to a plastic model, which you have to own separately.

What the pylons are for

Pylons are the load-bearing racks on which external stores are attached under the wing. In a kit they tend to be molded from halves or simplified in shape, so after gluing a parting line is left on the leading edge, which then has to be laboriously sanded. A resin casting is as a rule in one piece, with sharper edges and a clean profile, and it saves the work of filling.

The real subject

The North American Rockwell OV-10 Bronco was a twin-engine turboprop aircraft with a twin-boom layout, intended for observation, for directing air support and for light strike tasks. The OV-10A version was the basic American variant, the OV-10C an export configuration. A characteristic feature is the short glazed nacelle and the booms carrying the tail surfaces.

Building and painting tips

Wash the parts in lukewarm water with a drop of detergent, so that the mold release agent is removed, otherwise neither paint nor primer will hold. Cut the casting blocks off with a saw or a cutting disc and level the surfaces with a file and sanding paper wet, with respiratory protection. It is bonded with super glue, cyanoacrylate. Try the pylon dry and mark its position on the wing, as cyanoacrylate holds at once and a correction after it has set is difficult. Apply a primer before painting. Paint the pylons separately and glue them on only after the main color coats are finished, otherwise spraying and masking around them would be harder.

Who the set is for

  • Builders of a model of the OV-10 Bronco in 1:32 scale
  • Modelers building the OV-10A or OV-10C versions
  • Builders who are bothered by the parting line on plastic pylons
  • More experienced modelers used to working with resin

This is a detailing accessory, not a kit of the aircraft. The base model, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. These are resin pylons for a plastic model. The kit has to be bought separately.

The set is marked for the A and C versions. For the OV-10D the manufacturer issues a separate set, because the pylons differ between the individual versions.

Go by the contents stated on the packaging.

Best of all only after the main color coats have been sprayed, so that there is no need for complicated masking around them.

Last seen

Aires/QuickboostQB322961:32

1:32 OV-10A/C Bronco wing pylons

Quickboost 1:32 OV-10A/C Bronco underwing pylons are resin pylons for models of the OV-10A and OV-10C turboprop aircraft. It is a detailing accessory, not a kit of the aircraft.
In stock
7.96 €
AMTAMT12861:25

1:25 Kenworth 925 Tractor Coca-Cola

An injection-molded plastic kit of the American tractor Kenworth W-925 in the Coca-Cola version in 1:25 scale from the maker AMT.
In stock
66.36 €
1:35 M-1131 slat armour-25 %Stock ClearanceFavorite
EduardED361291:35

1:35 M-1131 slat armour

Eduard 1:35 M-1131 slat armor is a photo-etched accessory, not a model. It adds slat armor against shaped charges to the Stryker M-1131 FSV.
Last one!
25.32 €19 € You save 6.32 €
Freedom Model KitsFMK180191:48

1:48 X-47B AIR REFUELING (LIMITED EDITION)

Freedom Model Kits 1:48 X-47B Air Refueling (limited edition) is a plastic kit of the US Navy's unmanned demonstrator in 1:48 scale.
In stock
64.76 €
1:32 Fw 190F-8 motor-25 %Stock ClearanceFavorite
EduardED323751:32

1:32 Fw 190F-8 motor

Eduard 1:32 Fw 190F-8 engine is a photo-etched detail set from Eduard for refining the powerplant of the German Fw 190F-8 fighter.
2 left
17 €12.76 € You save 4.24 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.