RIVETER TRIPLE 0.95 MM is a three-row riveting wheel for imitating rivet rows on plastic models. The figure of 0.95 mm from the name identifies the version within the range.
Responsibility details are not available.
A three-row riveting wheel for imitating rivet rows in plastic. It is not a kit and not an accessory to one particular model, but a workshop tool that will last for dozens of builds. The designation TRIPLE corresponds to the three-row version; the brand distinguishes the single-row and two-row versions in the same way. The figure of 0.95 mm in the name tells the individual sizes in the range apart: a lower value means a finer track, a higher one a coarser track. This version belongs to the coarser part of the range.
The coarser end of the range aims at larger scales and at vehicles where the joints are heavy and the rivets prominent: hulls, armor plates, girders, ship hulls. On large surfaces a distinct track is desirable, because the model is viewed from a greater distance and fine dimples would be lost. The three-row version covers a wide seam in one stroke instead of several repeated passes.
On large surfaces work in shorter runs and wipe the wheel between them. Collected plastic dust lifts the wheel off the material and the row then weakens toward the end of the stroke.
Care: keep the working part clean and dry and store the tool so that it does not get knocked about against other tools. The box holds the riveting wheel itself; plastic, templates and paints are not included.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
