A board fence with wider boards and an angled cut in 1:35 scale is a laser-cut wooden accessory for dioramas from the Czech manufacturer Model Scene. The top edge of the fence runs at an angle.
Responsibility details are not available.
A scenery accessory for dioramas in 1:35 scale. The fence is made up of wider boards laid side by side and its top edge is not horizontal but cut at an angle — this creates a rising or falling line that suits sloping terrain and places where the fence meets a taller building. It is supplied as a laser-cut wooden part for assembly.
An angled top edge is a practical solution, not an ornament. When a fence climbs a hill or joins the gable of a building, the transition is solved precisely by chamfering the top edge, so that the fencing follows the terrain and no gap is left anywhere. For a diorama this is a rewarding feature: the angled line breaks the monotony of a straight edge and reveals that the ground of the scene is not a board but a slope.
Break the parts carefully out of the carrier sheet and true the cut edges with fine abrasive paper. Glue the wood with thin PVA wood glue or with cyanoacrylate; before building, let the assembly dry out completely on a flat surface so that the fence does not warp. Before gluing, mark the run of the terrain on the base and lay the fence against it dry — an angled cut only makes sense when it follows the real slope of the scene. Wide boards take a more pronounced wood grain; emphasize it with the point of a scalpel, then apply thinned brown and gray glazes. A dark wash into the joints and pigment in the shade of the soil at ground level tie the fence to the terrain.
The accessory is supplied as a laser-cut wooden part for assembly, unpainted. The glue, the paints and any further scenery materials are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
