LAST CHANCE! 20% OFF Ends Tonight!
1:350  IJN Submarine depot ship Heian Maru (For Hasegawa 40082)

1:350 IJN Submarine depot ship Heian Maru (For Hasegawa 40082)

35.16 €
Add to Cart

1:350 IJN Submarine depot ship Heian Maru (For Hasegawa 40082)

A 1:350 wooden deck for the submarine depot ship Heian Maru (Artwox Model) is an adhesive veneer with pre-printed planks, cut for the intricate decks of this ship. It is intended for the Hasegawa 40082 kit.

Scale1:350
Manufacturer Artwox Model
Product EAN8591111000000

Responsibility details are not available.

35.16 €
29.06 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

A 1:350 wooden deck for a model of the submarine depot ship Heian Maru by Artwox Model

This is not a kit but an aftermarket accessory. The thin wood veneer with a pre-printed pattern of deck planks has an adhesive back and is glued over the plastic deck of your model. The set is cut for the Hasegawa 40082 kit; check before you buy that this is your release, because the outline of the deck differs between releases.

Patina between the planks that brings a large area to life

Heian Maru was built as a large ship with spacious, fairly open decks, interrupted by cargo hatches and the bases of handling equipment. An extensive continuous area of wood looks attractive once it is glued down, but without weathering it reads as flat; it lacks depth. The solution is simple and even a beginner can manage it: seal the surface with a thin coat of matte varnish first and only then apply a heavily thinned wash in a darker shade. It runs by capillary action into the pre-printed seams between the planks by itself and draws the laying out. Wipe the excess off with a cloth always drawn along the planks, not across them: cross strokes leave smears that are conspicuous in 1:350 scale.

Going around hatches and equipment

Around the cargo hatches, the feet of the cranes and the bases of the superstructure you will need to trim the overhangs with a sharp knife run right along the edge of the plastic part. Work in small sections and keep checking that the veneer is not stretched over an edge anywhere: it is at circular bases that a ripple forms most easily. Level and degrease the plastic base before gluing, otherwise the edges will lift in time.

Who the set is for

  • The builder of a model of the submarine depot ship Heian Maru in 1:350 scale.
  • The modeler who likes working with washes and weathering.
  • Those interested in auxiliary and supply vessels with large wooden decks.
  • Anyone who wants to replace engraved plastic with real wood.

This is an accessory for a plastic kit, not a standalone model. The kit, paints, varnishes and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is a wooden deck, an accessory for a plastic kit, which has to be bought separately.

Only onto a varnished surface. On bare wood the wash would soak in all over and the whole deck would darken instead of only the seams.

With a cloth drawn along the planks, never across them. Cross strokes leave smears that show clearly at this scale.

That the veneer is not stretched over an edge. Work in small sections and trim the overhangs with a sharp knife run along the edge of the plastic.

Last seen

Artwox ModelAW100851:350

1:350 IJN Submarine depot ship Heian Maru (For Hasegawa 40082)

A 1:350 wooden deck for the submarine depot ship Heian Maru (Artwox Model) is an adhesive veneer with pre-printed planks, cut for the intricate decks of this ship. It is intended for the Hasegawa 40082 kit.
In stock
35.16 €
Voyager ModelPE351411:35

1:35 Pz.kPfw. IV Ausf F2/G (For DRAGON 6360)

Voyager Model 1:35 Pz.Kpfw. IV Ausf. F2/G is a photo-etched add-on set for a plastic kit you already own, not a standalone model. The brass photo-etched parts replace the thin sheet-metal areas of the tank, which injection-molded plastic handles only in coarser form. Intended for the Dragon 6360 kit.
In stock
21.96 €
Plastruct PLT90658

Open Web Truss Warren (1 pcs) H-25,4mm W-46,8mm T-7,9mm L-300mm

Plastruct Open Web Truss Warren — a plastic truss girder, 1 pc is a building semi-finished material with a Warren truss pattern. Height 25.4 mm, width 46.8 mm, thickness 7.9 mm, length 300 mm.
In stock
7.96 €
Plastruct PLT90023

I Beam (1 pcs) H 3.2, W 1.6, T 0.6, L 375 mm

Plastruct I Beam — a plastic I profile (double T beam), 1 pc is a raw material for modelers. Height 3.2 mm, flange width 1.6 mm, thickness 0.6 mm, length 375 mm.
In stock
1.80 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.