Brake disc bobbins 1:12 from Decalcas: the small parts that tie a floating disc to its carrier on motorcycles.
Responsibility details are not available.
A set of the small connecting elements that tie a floating brake disc to its carrier on motorcycles. They are not decoration: under braking the disc heats up and expands, and if it were bolted down solid it would warp. A floating mounting lets it work, and that ring of small bobbins around the rim is the most noticeable thing on the disc of a sports motorcycle. In 1:12 scale they are clearly visible and a plastic kit usually only suggests them.
Drill the holes around the rim of the disc in advance and space them evenly; on a circular layout any irregularity shows at once. Seat the parts with a drop of cyanoacrylate glue and work with tweezers over a tray. Paint only once they are seated: the disc tends to be steel and the carrier anodized, so it pays to tell the two apart and to leave the bobbins themselves in a metallic shade. A dark wash around the heads will add depth.
The set is an accessory, not a kit. The model, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
