An accessory for building a model of the Honda CBR1000RR-R Fireblade SP in 1:12 scale. The contents of the set are given in the manufacturer's instructions.
Responsibility details are not available.
The Honda CBR1000RR-R Fireblade SP is a road supersport introduced for 2020, powered by a one-liter inline four. The SP version differs from the basic one in its suspension components and higher-class brakes. Part of its look are the aerodynamic winglets in the front fairing, an element that reached production from racing machines and is clearly visible on a model.
An accessory for the Fireblade SP model in 1:12 scale. In this scale a finished motorcycle is about sixteen centimeters long, so the shape of every lever and the routing of every hose shows on it. Exactly what the package holds and which kit the accessory is measured for are given in the manufacturer's instructions.
If the parts are not polystyrene, glue them with super glue; ordinary kit cement has no effect on them. Cut the surplus material off with a sharp blade a little away from the part and sand the traces of manufacture down with fine abrasive paper. Before painting, wash the surface in lukewarm water with a drop of dish soap and let it dry, otherwise paint will not hold on a smooth surface. Apply the paint in thin coats so that the edges of small parts are not lost.
For builders of road motorcycles in a large scale who finish the details of the chassis and the fairing. Paints and glue are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
