29.–30. 10. z technických důvodů zavřeno. / Closed 29–30 October for technical reasons.
1:48 A-26C-15 Invader - color schemes 1 and 2 EXPERT kabuki masks

1:48 A-26C-15 Invader - color schemes 1 and 2 EXPERT kabuki masks

9.56 €
Add to Cart

1:48 A-26C-15 Invader - color schemes 1 and 2 EXPERT kabuki masks

1:48 A-26C-15 Invader - color schemes 1 and 2 EXPERT kabuki masks is a kabuki paper masking set for a model of the Douglas Invader twin-engine attack bomber, tied to color schemes number 1 and 2. It is not a kit and not decals.

Scale1:48
Manufacturer New Ware
Product EAN8591111000000

Responsibility details are not available.

9.56 €
7.90 € without VAT
1 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Douglas A-26C-15 Invader 1:48: a New Ware masking set, the EXPERT level

The set brings pre-cut self-adhesive kabuki paper masks for a model of the Douglas Invader twin-engine attack bomber in the version with a glazed nose, in 1:48 scale. According to its name it is tied to color schemes number 1 and 2, that is to two particular variants of finish, and it carries the designation EXPERT, which with this manufacturer is a higher grade than the entry line. It is an accessory for a model, not the model itself.

The real subject

The Invader was an American twin-engine attack and bombing aircraft with a pair of radial engines, which reached combat only at the end of the Second World War and then served for a long time afterwards. The version with the letter C in its designation had a glazed nose for a navigator and a bombardier, unlike the configuration with a solid nose fitted with gun armament. The glazed nose is exactly the area where a masking set pays off most: it combines flat panes, angled frames and the transition into the outline of the fuselage, where tape cut to size is very hard to stick down.

How to work with the masks

Work from the largest areas to the smallest and press each mask down around its whole perimeter, especially in the corners of the panes. Cover the remaining uncovered areas of the glazing, the inside of the pilot's cabin for instance, with ordinary tape or fill them with liquid mask. With two color schemes it pays to decide in advance which one you are building and to choose the order of the shades accordingly: the lighter one first, then the darker. Check the edge of the mask against the light once more after spraying, before you start varnishing the gloss under the decals.

Who the set is for

  • Builders of American twin-engine bombers in 1:48 scale.
  • Modelers who want clean frame edges on an extensive glazed nose.
  • Those building a particular color scheme who want the masking prepared in advance.
  • More advanced modelers working with an airbrush.

The package contains masks only. The kit, the paints, the glue and the decals are not included in the delivery, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is a standalone masking set made for a model you already have. The kit, the paints and the glue are not in the package.

The set is prepared for two particular variants of finish, numbered according to the references it is cut to. If you are building a different scheme, look for the corresponding sheet.

With this manufacturer EXPERT is a higher grade of the range and it tends to be more extensive than the entry variant. The scope of this sheet is stated on the packaging of the set.

Shortly after the varnish has dried, with a pull at an angle toward yourself. If the paint did seep under somewhere, fix it by scratching with a toothpick once it has dried, not with solvent.

Last seen

New WareNWAM07221:48

1:48 A-26C-15 Invader - color schemes 1 and 2 EXPERT kabuki masks

1:48 A-26C-15 Invader - color schemes 1 and 2 EXPERT kabuki masks is a kabuki paper masking set for a model of the Douglas Invader twin-engine attack bomber, tied to color schemes number 1 and 2. It is not a kit and not decals.
In stock
9.56 €
FlyhawkFH7000201:700

1:700 WWII RN Battle Cruiser HMS Hood 1941 Trumpeter 05740

The Flyhawk 1:700 detail set for the battlecruiser HMS Hood 1941 is an accessory for a ship model, not a kit.
In stock
43.96 €
ŘOP o.s.MNFDL720331:72

1:72 Boulton Paul Defiant - Night predators of the RAF

The waterslide decal set Boulton Paul Defiant - Night predators of the RAF in 1:72 scale from the Czech publisher ROP o.s. It is not a model but additional night fighter markings for a kit.
In stock
7.96 €
MH modelsMHX720261:72

1:72 Northrop Delta Mk.II / Mk.III canopy airbrush mask for Special Hobby

A masking set for the glazing of the Northrop Delta Mk.II and Mk.III in 1:72 scale brings pre-cut templates for spraying the frames of the long glazed cabin. The set is cut for the Special Hobby kit.
In stock
3.96 €
ReskitRSM72-00211:72

1:72 F-16 two-seat - pre-cut painting masks (Revell)

1:72 F-16 two-seat - pre-cut painting masks is a set of pre-cut painting masks for the two-seat F-16. The set is cut for the Revell kit.
In stock
5.96 €
ReskitRSU48-05671:48

1:48 MiG-29 Fulcrum centerline PTB-1500 fuel tank (1 pcs)

The centerline PTB-1500 fuel tank for the MiG-29 is a 3D-printed (resin) detail set in 1:48 scale from Reskit. It is a central drop tank, not an aircraft model.
In stock
13.56 €
Hobby DesignHD02-04021:24

1:24 Toyota GR Supra Detail-up Set for Tamiya kit #24351

Toyota GR Supra 1:24, detail extras from Hobby Design for the fifth generation of the famous coupe from the Gazoo Racing division. Intended for the Tamiya 24351 kit.
In stock
27.96 €
X-ScaleXSC1440111:144

1:144 Airbus A300B4-605R Long Range - Wide Body Passenger Airliner

The Airbus A300B4-605R in 1:144 scale is a kit of the wide-body twin-engine airliner in the Long Range version from the maker X-Scale.
In stock
51.96 €
One Piece - DXF The Grandline Series Wanokuni Vol. 4 - Yamato-25 %Stock ClearanceFavorite
BandaiBANBP18857

One Piece - DXF The Grandline Series Wanokuni Vol. 4 - Yamato

One Piece DXF The Grandline Series Wanokuni Vol. 4 - Yamato is a finished collector figure. It comes painted from the factory and only needs displaying.
Last one!
39.96 €29.96 € You save 10 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.