1:48 AH-1Z Zulu Cobra/Viper 3D-Printed & coloured Interior on decal paper (KittyHawk) (small version)

1:48 AH-1Z Zulu Cobra/Viper 3D-Printed & coloured Interior on decal paper (KittyHawk) (small version)

9.16 €
Add to Cart

1:48 AH-1Z Zulu Cobra/Viper 3D-Printed & coloured Interior on decal paper (KittyHawk) (small version)

A colored 3D interior for the model of the attack helicopter AH-1Z in 1:48 scale, in a reduced-scope version for KittyHawk kits. The elements slide off the backing paper after a brief soak.

Scale1:48
Manufacturer Quinta Studio
Product EAN8001111783599

Responsibility details are not available.

9.16 €
7.57 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The AH-1Z is a US Marine Corps attack helicopter, the final development branch of the Cobra line. Its crew consists of two men seated in tandem, each in his own cockpit with extensive instrumentation and large-area displays. The glazing is large and segmented, so the interior remains clearly visible from both sides on the finished model.

What the set contains

The set consists of colored, three-dimensional interior elements printed on decal paper. They have pre-printed shades, markings and shading and carry real thickness, so they replace the flat printing of plastic parts. This is a reduced-scope version of the set, focused on the most visible spots of both cockpits, chiefly the instrument panels, side consoles and seats. The design matches KittyHawk kits.

Building tips

Soak the sheet briefly in lukewarm water and slide the element off the backing paper; it has no adhesive layer of its own and adheres to a gloss finish — a matte base is a mistake. Do not use a decal softener, since it will damage the printed resin. Degrease the surface underneath, level it and remove any raised plastic details that the elements are meant to replace. Transfer the parts with tweezers and press them down with a soft tool. Paint the interior of the cockpits before you start placing the elements, since you will no longer be able to reach the walls with a brush once they are glued down.

Who it is for

The set suits modelers who want accurate cockpits under the large glazing and do not want to paint dozens of tiny instruments. The work is simpler than assembling photo-etched parts and is manageable even for a less experienced builder. The kit, paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

For AH-1Z kits from KittyHawk in 1:48 scale.

The set has a smaller scope than the full version and focuses on the most visible spots of both cockpits.

They have no adhesive layer of their own. The sheet is soaked briefly in lukewarm water, the element is slid off the backing paper onto a gloss finish, and a decal softener is not used.

Yes, it is a good idea to level the surfaces and remove the raised details that the new elements are meant to replace.

Last seen

Quinta StudioQDS485351:48

1:48 AH-1Z Zulu Cobra/Viper 3D-Printed & coloured Interior on decal paper (KittyHawk) (small version)

A colored 3D interior for the model of the attack helicopter AH-1Z in 1:48 scale, in a reduced-scope version for KittyHawk kits. The elements slide off the backing paper after a brief soak.
In stock
9.16 €
MASTERAM720721:72

1:72 MiG-17PF (Fresco D) - 23mm gun barrels set & Pitot Tubes

MASTER 1:72 MiG-17PF (Fresco D) - 23 mm cannon barrels and pitot tubes is a set of turned metal details. It is not a model but an accessory.
In stock
5.96 €
TrumpeterTR015141:35

1:35 German Sd.Kfz.7 Mittlere Zugkraftwagen 8t early version

Plastic kit of the German Sd.Kfz.7 Mittlere Zugkraftwagen 8t (early) (Trumpeter) in 1:35 scale — the German medium half-track tractor in its early version.
In stock
26.76 €
1:72 MiG-21PFM Emerald panels 3D-Printed & coloured Interior on decal paper (Eduard)-25 %Stock ClearanceFavorite
Quinta StudioQD721081:72

1:72 MiG-21PFM Emerald panels 3D-Printed & coloured Interior on decal paper (Eduard)

Quinta Studio 1:72 MiG-21PFM with emerald panels is a 3D-printed, colored interior on decal paper for a model of the Soviet supersonic fighter. The target kit is Eduard.
2 leftof 7
8.36 €6.28 € You save 2.08 €
MAC DistributionMAC720671:72

1:72 Deutsche Africa Korps 3t AA Vehicle with Flak 38

A plastic kit of the German three-ton anti-aircraft vehicle with the Flak 38 gun in Afrika Korps colors in 1:72 scale from MAC Distribution. An Opel Blitz truck with an open cab and a 2 cm Flak 38 gun on the bed, in the desert deployment of North Africa.
In stock
13.16 €
FujimiFU460691:700

1:700 Wood Deck Seal for IJN Battleship Haruna w/Name Plate

A wooden deck 1:700 for the Japanese battleship Haruna with a name plate is an adhesive accessory from the Japanese manufacturer Fujimi that replaces the painting of a plastic deck with real wood veneer. It is not a ship model but an accessory for a kit.
In stock
30.36 €
SX-ArtSXA350631:35

1:35 Tinting film Typhoon-K GREEN (TAKOM)

A green tinting film 1:35 for the Typhoon-K armored car from SX-Art is cut for the kit from Takom. With it the glazing of the model gains the green cast of laminated glass.
In stock
3.56 €
ReskitRS72-03451:72

1:72 Mark 82 bombs with Mk.15 Snakeye fins thermally protected (4pcs)

A set of four resin Mark 82 bombs with Mk.15 Snakeye retarding fins in the thermally protected version, 1:72 scale from Reskit for making the armament of aircraft models more accurate.
In stock
7.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.