Masks for covering the glazing of a Boeing F/A-18E Super Hornet model in 1:48 scale, in the TFace form, that is for the outside and the inside.
Responsibility details are not available.
The Boeing F/A-18E Super Hornet is a single-seat carrier-based multirole aircraft with two turbofan engines. You recognize it by the large leading-edge extensions at the wing root, the angular air intakes and the pair of canted vertical tail surfaces. The cockpit has a large sliding canopy, so the framing of the glazing and its color transition are clearly visible on a finished model.
Masks for an F/A-18E model in 1:48 scale in the TFace form. That means the set covers the glazing from both sides: the outer masks define the framing when spraying from outside, and the inner ones cover the same from inside the cockpit. Which surfaces are covered and whether the set also contains wheel masks is given in the manufacturer's instructions.
The masks are applied before spraying, onto dry and degreased glazing. They are laid on with tweezers, pressed down from the center to the edges, and the edge is run over with a toothpick so that no paint gets underneath. Apply the paint in thin layers. Fit the inner masks before you glue the canopy into the fuselage, otherwise you will no longer reach them. Take them off as soon as the paint has flashed off, pulling straight upward.
The kit of the aircraft, paints and glue are not included in the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
